Home > Do-It-Yourself > Welders > Clarke Welders > Clarke MIG 180 Welder

Manual Clarke MIG 180 Welder

Name: Clarke MIG 180 Welder
Brand: Clarke
SKU: MIG 180
Rating: 0 (1 reviews)

Need a manual for your Clarke MIG 180 Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 1 vote with an average product rating of 0/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ELECTRICAL CONNECTIONS (MIG 145)

Before switching the product on, make sure that the voltage of your electricity

supply is the same as that indicated on the rating plate. This product is designed to

operate on 230VAC 50Hz. Connecting it to any other power source may cause

damage.

This product may be fitted with a non-rewireable plug. If it is necessary to change

the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost

or damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to

damage, it should be cut off and a replacement fitted, following the wiring

instructions shown below. The old plug must be disposed of safely, as insertion into

a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with

the markings on the terminals of your plug, proceed as follows.

• The wire which is coloured Blue must be connected to the terminal

which is marked N or coloured Black.

• The wire which is coloured Brown must be connected to the terminal

which is marked L or coloured Red.

• The wire which is coloured Yellow and Green must be connected to the

terminal which is marked E or or coloured Green.

We strongly recommend that this machine is connected to the mains supply via a

Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs

yourself.

WARNING! Read these electrical safety instructions thoroughly

before connecting the product to the mains supply.

WARNING! The wires in the power cable of this product are

coloured in accordance with the following code:

Blue = Neutral Brown = Live Yellow and Green = Earth

Plug must be BS1363/A approved.

Always fit a 13 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral

(Blue)

Live

(Brown)

Earth

(Green and Yellow)

Rating

Let us know what you think about the Clarke MIG 180 Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke MIG 180 Welder?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the Clarke MIG 180 Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke MIG 180 Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke MIG 180 Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	MIG 180
Category	Welders
File type	PDF
File size	4.56 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke MIG 180 Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more