Home > Do-It-Yourself > Welders > Clarke Welders > Clarke MIG 165TE Welder

Manual Clarke MIG 165TE Welder

Need a manual for your Clarke MIG 165TE Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

WELDER SPECIFICATIONS

This model is covered by

regulations EN 60974-1 and

EN 50199, where the Duty

Cycle (X) is expressed as a

percentage of time the

machine may be used in a

given period for a specified

welding current.

i.e. When welding at 85

Amps with a MIG 175TE, the

machine may be used for 6

minutes (60%) in any 10

minute period..

DUTY CYCLE

Please note that the details and specifications contained herein, are correct at the time of

going to print. However, CLARKE International reserve the right to change specifications at any

time without prior notice. ALWAYS CONSULT THE MACHINE’S DATA PLATE

PRIMARY or INPUT POWER DATA 165TE 175TE

Primary Volts 230V / 1PH 230V / 1PH

Fuse Rating 16 Amps 20 Amps

Frequency 50Hz 50Hz

SECONDARY DATA

Sec. Volts 18 - 29 V 23 - 42 V

Max. Sec. Amps 150 Amps 170 Amps

USABLE WIRE SIZES

Mild Steel Wire 0.6-0.8mm 0.6-0.8mm

Stainless Steel Wire 0.8mm 0.8mm

Aluminium Wire 0.8mm 0.8mm

USABLE GASES MAIN USES

75% Argon 25% CO2 - Thin Sheet Metal, Mild Steel

100% Argon - Welding Aluminium, Stainless Stl

100% CO2 - Mild Steel

............or, the machine may be used continuously, (100%) when welding at 65 Amps.

Interpolate for other welding currents

When disposing of this product, it must be disposed of according to all local ordinances.

DISPOSAL

Rating

Let us know what you think about the Clarke MIG 165TE Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke MIG 165TE Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke MIG 165TE Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke MIG 165TE Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke MIG 165TE Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	MIG 165TE
Category	Welders
File type	PDF
File size	1.0 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke MIG 165TE Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more