Home > Do-It-Yourself > Welders > Clarke Welders > Clarke MIG 105EN Welder

Manual Clarke MIG 105EN Welder

Need a manual for your Clarke MIG 105EN Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

3. ELECTRIC ARC (MIG, TIG) WELDING

Comply with precautions in 1 above, and this section. Arc welding, properly done,

is a safe process, but a careless operator invites trouble. The equipment carries

high currents at significant voltages. The arc is very bright and hot. Sparks fly, fumes

rise, ultraviolet and infrared energy radiates, weldments are hot. The wise operator

avoids unnecessary risks and protects himself and others from accidents.

3A) BURN PROTECTION

Comply with precautions in 2. The welding arc is intense and visibly bright. Its

radiation can damage eyes, penetrate lightweight clothing, reflect from light

coloured surfaces, and burn the skin and eyes. Skin burns resemble acute sunburn,

those from gas - shielded arcs are more severe and painful.

DON’T GET BURNED! COMPLY WITH PRECAUTIONS!

1) Protective clothing

Wear long sleeved clothing (particularly for gas shielded arc) in addition to such as

leather jacket or sleeves, flameproof apron, and fire-resistant leggings. Avoid outer

garments of untreated cotton. Bare skin protection: Wear dark substantial clothing,

Button collar to protect chest and neck. Button pockets to prevent entry of sparks.

2) Eye and head protection

Protect eyes from exposure to arc. NEVER look at an electric arc without protection.

Welding helmet or shield containing a filter plate shade no. 12 or denser must be

used when welding. Place over face before striking arc. Protect filter plate with a

clear cover plate. Cracked or broken helmet or shield should NOT be worn; radiation

can pass through to cause burns. Cracked, broken, or loose filter plates must be

replaced IMMEDIATELY. Replace clear cover plate when broken, pitted, or spattered.

WE SUGGEST you wear flash goggles with side shields under the helmet, to give

some protection to the eyes should the helmet not be lowered over the face before

an arc is struck. Looking at an arc momentarily with unprotected eyes (particularly

a high intensity gas-shielded arc) can cause a retinal burn that may leave a

permanent dark area in the field of vision. Before welding whilst wearing contact

lenses, seek advice from your optician.

3) Protection of nearby personnel

For production welding, a separate room or enclosed bay is best. In open areas,

surround the operation with low reflective, non- combustible screens or panels. Allow

for free air circulation, particularly at floor level. Provide face shields for all persons

who will be looking directly at the weld. Others working in the area should wear flash

goggles. Before starting to weld, make sure that screen or bay doors are closed.

Download manual in English (PDF, 5.75 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Clarke MIG 105EN Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke MIG 105EN Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke MIG 105EN Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke MIG 105EN Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke MIG 105EN Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	MIG 105EN
Category	Welders
File type	PDF
File size	5.75 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke MIG 105EN Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (27) Read more