Home > Garden & Terrace > Water Pumps > Clarke Water Pumps > Clarke Hippo 3A Water Pump

Manual Clarke Hippo 3A Water Pump

Need a manual for your Clarke Hippo 3A Water Pump? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

FEATURES

The pumps are of rugged and durable construction, designed for long lasting continuous

operation, and the motor is provided with a built in overload protector.

For your information, the chart on page 7 illustrates the flow rate at various heads.

(HEAD is the distance, or height, from the pump outlet to the highest point of discharge)

All models are designed for pumping CLEAN WATER ONLY and will pump down to a

water level of 5mm.

Automatic Pumps, i.e. those fitted with a Float Switch, denoted by an ‘A’ suffix to their

model number, are suitable for permanent or semi-permanent installations, eg. installations

where it is necessary to maintain a water at a particular level.

As the water level rises, the switch will float, and start the pump. As the water level falls,

so will the float switch, until it stops the pump.

Float switches are factory set to provide the correct ON-OFF switching mode, however,

you can adjust the level at which the pump cuts out by sliding the float switch cable, in its

clip attached to the handle, to either shorten or lengthen it as the case may be. The

shorter it is, the earlier it will cut out and therefore, the deeper will be the water at this

point.

INSTALLATION

An Elbow Outlet is provided with a 1-1/4”BSP

thread at either end as shown in the diagram

opposite. Ensure the end provided with an O-Ring

is screwed into the pump outlet. Screwed into the

other end of the elbow, is a multi hose connector

capable of accepting 1”, 3/4” 0r 1/2” hose. Simply

attach a suitable hose to your preferred connector

with a worm drive clip.

If the pump is to be used for drainage purposes, or

in situations that demand maximum efficiency, we

strongly recommend that you connect a 1” dia. hose

Download manual in English (PDF, 2.14 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Clarke Hippo 3A Water Pump by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke Hippo 3A Water Pump?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke Hippo 3A Water Pump. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke Hippo 3A Water Pump. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke Hippo 3A Water Pump in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.