Home > Garden & Terrace > Water Pumps > Clarke Water Pumps > Clarke Hippo 3A Water Pump

Manual Clarke Hippo 3A Water Pump

Need a manual for your Clarke Hippo 3A Water Pump? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Thank you for purchasing this CLARKE, HIPPO Submersible Pump.

These highly efficient pumps are designed for pumping clean water only, and are ideally

suited for draining ornamental ponds, swimming pools etc.Water temperature must not

exceed 35° C.

The HIPPO-3A differs from the HIPPO-3 in that it incorporates a float switch, which

automatically switches the pump OFF and ON when the water reaches a pre-determined

level. The minimum suction level being 5mm. Both models are available for use with 110V

and 230V supply’s. Please take note of the information regarding electrical installation .

Before attempting to operate your pump, please read this instruction manual thoroughly

and follow all directions carefully. This is for your own safety and that of others around

you, and to help you achieve long and trouble free service from your pump.

GUARANTEE

This product is guaranteed against faults in manufacture for 12 months from purchase

date. Keep your receipt as proof of purchase.This guarantee is invalid if the product has

been abused or tampered with in any way, or not used for the purpose for which it is

intended. The reason for return must be clearly stated. This guarantee does not affect

your statutory rights.

Please note that dismantling this pump will invalidate the guarantee

SAFETY PRECAUTIONS

1. These pumps are designed to pump CLEAN WATER ONLY. Never use for pumping

flammable liquids or chemicals.

2. Never run the pump dry.

3. An approved Residual Current Device (RCD) MUST be used when pumping from

ponds or swimming pools.

4. Your submersible pump may ONLY be used for pumping water from

a swimming pool when there is no person or animal in the pool.

5. Always disconnect the pump from the electrical supply before

placing it into, or removing it from the water, and before any

cleaning or maintenance of the pump.

6. Always use the moulded handle with a rope or cord attached

when lifting the pump. NEVER lift the pump by the mains

cable, or, where fitted, the float switch cable.

7. DO NOT run the pump with the body exposed for longer

than 10 minutes.

8. DO NOT install the pump on ground which is likely to shift.

9. Do not use the pump if the water is liable to freeze, as this can cause damage to the

pump. Remove the pump from the water and store it in a frost free location.

Download manual in English (PDF, 2.14 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Clarke Hippo 3A Water Pump by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke Hippo 3A Water Pump?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke Hippo 3A Water Pump. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke Hippo 3A Water Pump. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke Hippo 3A Water Pump in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.