Home > Do-It-Yourself > Welders > Clarke Welders > Clarke CW 235TE Welder

Manual Clarke CW 235TE Welder

Need a manual for your Clarke CW 235TE Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

2B) TOXIC FUME PREVENTION

Comply with precautions in 2-B. Generator engine exhaust must be vented to the

outside air.

Carbon monoxide can kill.

2C) FIRE AND EXPLOSION PREVENTION

Comply with precautions in 2-C. Equipment’s rated capacity. Do not overload

arc welding equipment. It may overheat cables and cause a fire. Loose cable

connections may overheat or flash and cause a fire. Never strike an arc on a

cylinder or other pressure vessel. It creates a brittle area that can cause a violent

rupture or lead to such a rupture later under rough handling.

2D) SHOCK PREVENTION

Exposed live conductors or other bare metal in the welding circuit, or in unearthed,

electrically-LIVE equipment can fatally shock a person whose body becomes a

conductor. DO NOT STAND, SIT, LIE, LEAN ON, OR TOUCH a wet surface when

welding, without suitable protection.

2E) PROTECTION FOR WEARERS OF ELECTRONIC LIFE SUPPORT DEVICES (PACEMAKERS)

Magnetic fields from high currents can affect pacemaker operation. Persons

wearing electronic life support equipment (pacemaker) should consult with their

doctor before going near arc welding, gouging, or spot welding operations.

2F) TO PROTECT AGAINST SHOCK:

Keep body and clothing dry. Never work in damp area without adequate insulation

against electrical shock. Stay on a dry duckboard, or rubber mat when dampness

or sweat can not be avoided. Sweat, sea water, or moisture between body and

an electrically LIVE part - or earthed metal - reduces the body surface electrical

resistance, enabling dangerous and possibly lethal currents to flow through the

body.

1) Earthing the equipment

When arc welding equipment is earthed according to the National Electrical

Code, and the work is earthed, a voltage may exist between the electrode

and any conducting object.

Examples of conducting objects include, but are not limited to, buildings,

electrical tools, work benches, welding power source cases, workpieces, etc.

Never touch the electrode and any metal object unless the welding power

source is off. When installing, connect the frames of each unit such as welding

power source, control, work table, and water circulator to the building earth.

Conductors must be adequate to carry earth currents safely. Equipment made

electrically LIVE by stray current may shock, possibly fatally. Do NOT EARTH to

electrical conduit, or to a pipe carrying ANY gas or a flammable liquid such

as oil or fuel.

Rating

Let us know what you think about the Clarke CW 235TE Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CW 235TE Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CW 235TE Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CW 235TE Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CW 235TE Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	CW 235TE
Category	Welders
File type	PDF
File size	0.18 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke CW 235TE Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more