Home > Do-It-Yourself > Welders > Clarke Welders > Clarke CW 235TE Welder

Manual Clarke CW 235TE Welder

Need a manual for your Clarke CW 235TE Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ELECTRICAL CONNECTIONS

WARNING! THIS APPLIANCE MUST BE EARTHED.

A. MODELS FITTED WITH 13AMP PLUG

Welders fitted with a standard 13 amp BS 1363 plug, should be connected to a to a

230 volt (50Hz) domestic electrical supply and we strongly recommend that this be

done via a Residual Current Device (RCD).

IMPORTANT: If the welder is fitted with a plug which is moulded onto the electric

cable (i.e. non- re-wirable) please note:

1. The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code). Replacement

fuse covers can be obtained from your local dealer or most electrical stockists.

Fuse Rating

The fuse in the plug must be replaced with one of the same rating (13 amps) and

this replacement must be ASTA approved to BS1362.

B. ALL OTHER MODELS

230V Supply

Connect the mains lead to a suitably fused 230 Volt (50Hz) electrical supply. The

fuse rating should correspond to that shown on the data plate on the rear panel

of the machine. For a full explanation of the data plate, please see page 22 & 23.

The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow .......... Earth

Blue .......... Neutral

Brown .......... Live

As the colours of the flexible cord of this appliance may not correspond with the

coloured markings identifying terminals in your plug, proceed as follows:

• Connect GREEN & YELLOW cord to plug terminal marked with a letter “E” or

Earth symbol “ ”, or coloured GREEN or GREEN & YELLOW.

• Connect BROWN cord to plug terminal marked letter “L” or coloured RED.

• Connect BLUE cord to plug terminal marked letter “N” or coloured BLACK.

Rating

Let us know what you think about the Clarke CW 235TE Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CW 235TE Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CW 235TE Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CW 235TE Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CW 235TE Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	CW 235TE
Category	Welders
File type	PDF
File size	0.18 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke CW 235TE Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more