Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TROUBLE SHOOTING

Problem Probable cause Solution

Saw will not start 1. Saw not plugged in

2. Fuse blown

3. Power cable damaged

1. Plug in the machine

2. Replace fuse

3. Have cable replaced by

your dealer.

Does not make accurate

and 90

cuts

1. Table adjuster not set

correctly

1. Check blade with a set

square and adjust pointer

to zero.

Material pinches blade 1. Fence not aligned with

blade. Warped wood. Edge

not set square to fence.

1. Check and adjust fence.

Select another piece of

wood

Material binds on the riving

knife

1. Riving knife not aligned

correctly

1. Check that riving knife is

correctly aligned with

blade

Saw makes unsatisfactory

cuts

1. Dull blade

2. Blade mounted backwards

3. Gum or pitch on blade

4. Incorrect blade for work

5. Gum or pitch on table

causing erratic feed

1. Replace blade

2. Turn blade around

3. Remove blade and clean

with turpentine and

coarse steel wool

4. Change the blade

5. Clean table with

turpentine and steel wool

and apply wax

Material kicked back from

blade slot

1. Rip fence out of alignment

2. Riving knife not aligned with

blade

3. Feeding stock without rip

fence

4. Riving knife not in place

5. Letting go of wood before

it is all the way past the saw

blade

6. Dull blade

1. Align rip fence with blade

2. Align riving knife with

blade

3. Install and use rip fence

4. Install and use riving knife

with guard

5. Push work fully past blade

before releasing work

6. Replace blade

Blade does not tilt freely 1. Sawdust in tilting

mechanism

1. Brush or blow out loose

dust

Blade does not come up to

speed

1. Extension cable too long 1. Replace or use shorter

cable

Machine vibrates 1. Saw not standing securely

on bench

2. Damaged saw blade

1. Reposition on flat level

surface

2. Replace blade.

Does not make accurate

and 90

cuts

1. Mitre gauge out of

adjustment

1. Adjust mitre gauge

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.