Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS800C Table Saw

Manual Clarke CTS800C Table Saw

Need a manual for your Clarke CTS800C Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

The following items should be supplied in the carton. If any parts are missing,

do not use your table saw until the missing parts are obtained.

FITTING THE PARALLEL FENCE

The parallel fence is essential to

ensure straight line cutting and

should always be used when rip

sawing.

The fence is secured to the table with

two knob head screws, acting on a

pair of clamp plates, one at the front

and one at the rear of the table.

The fence may be placed at any

suitable position on the table, and

either left or right of the saw blade. Do not over-tighten the securing knobs.

Measurement scales (in mm) are provided at the front and back of the table.

These may be used to position the rip fence for rough cutting. If precision is

required, use a ruler between the rip fence and the front and back of the

blade.

When not is use the parallel fence

can be stored on the plastic storage

clips provided, after clipping them to

the frame as shown.

1 x Table Saw 1 x Fixings Pack

1 x Parallel Guide Fence 1 x Push Stick

1 x Mitre Guide 1 x 8” TCT Blade (fitted)

1 x Guide fence 1 x Upper Blade Guard Assembly

2 x Wrenches (1 slotted/1 x Hex)

Rating

Let us know what you think about the Clarke CTS800C Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS800C Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS800C Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS800C Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS800C Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.