Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CTS10D Table Saw

Manual Clarke CTS10D Table Saw

Need a manual for your Clarke CTS10D Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

19. DON’T OVERREACH. Keep your proper footing and balance at all times. For best footing

wear rubber soled shoes or boots. Keep the floor clear of oil, scrap wood, etc.

20. WEAR PROPER APPAREL. Loose clothing or jewellery may get caught in moving parts.

Wear protective hair covering to contain long hair.

21. MAKE WORKSHOP CHILDPROOF. Lock the saw away, or cover securely when not in use.

ADDITIONAL SAFETY RULES FOR TABLE SAWS

✔ ALWAYS use saw Blade Guard and Riving Knife for every operation.

✔ ALWAYS hold the work firmly against the mitre gauge or fence.

✔ ALWAYS use a push-stick when required. Always use a push-stick for ripping narrow

stock. Refer to ripping applications in instruction manual where push-stick is covered in

detail.

✔ ALWAYS use in a well ventilated area. Remove sawdust frequently. Clean out sawdust

from the interior of the saw to prevent a potential fire hazard.

✔ ALWAYS move the rip fence out of the way when crosscutting.

✔ ALWAYS switch off and disconnect from supply before removing off cuts of wood from

the machine

✔ ALWAYS provide adequate support to the rear and sides of the saw table for wide or

long workpieces.

✔ ALWAYS keep the blade sharp, the Rip Fence parallel to the saw blade, and the Riving

Knife and Blade Guard in place. Do not release work before it is pushed all the way

past the saw blade.

✔ ALWAYS avoid awkward operations and hand positions where a sudden slip could cause

your hand to move into the blade.

✔ PERMANENTLY mount your table saw before performing any cutting operations.

Refer to ‘Mounting the Saw’ on page 15.

✘ NEVER stand or have any part of your body in line with the path of the saw blade.

Keep your hands out of the line of the saw blade.

✘ NEVER reach behind or over the blade for any reason.

✘ NEVER use the fence as a cutoff gauge when crosscutting.

✘ NEVER attempt to free a stalled saw blade without first turning the saw OFF. Turn off

power switch immediately to prevent motor damage.

✘ NEVER use solvents to clean plastic parts. Solvents could possibly dissolve or otherwise

damage the material. Only a soft damp cloth should be used to clean plastic parts.

✘ NEVER force feed the work into the blade. A light pressure ONLY is required

✘ NEVER cut metals or materials which may make hazardous dust.

✘ NEVER perform any operation ‘freehand’ which means using your hands to support or

guide the work piece. Always use either the fence or the mitre gauge to position and

Rating

Let us know what you think about the Clarke CTS10D Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CTS10D Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CTS10D Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CTS10D Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CTS10D Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.