GUARANTEE.
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt which will be required as proof of
purchase.
This guarantee is invalid if the product is found to have been abused in any way, or not used
for the purpose for which it was intended. Faulty goods should be returned to their place of
purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
HYDRAULIC TROLLEY JACK
0709
Model Nos. CTJ2000G, CTJ2000GA, CTJ2QLG, CTJ2250LS, CTJ3QLG & CTJ3000LS
Thank you for purchasing this Clarke Trolley Jack.
Before attempting to use the unit, please read this instruction booklet thoroughly, and follow
all directions carefully, paying particular attention to the safety precautions. By doing so, you
will ensure the safe operation of the unit, and the safety of yourself and others around you.
You can then look forward to long and reliable service from your CLARKE Trolley Jack.
PROBLEM PROBABLE CAUSE REMEDY
Jack will not lift Oil level low Top up oil
to full height
Jack will not hold . 1 Release valve not closing 1 Turn handle fully clockwise
the load 2 Pump valves not seating 2 Consult your CLARKE dealer
3 Air in ram 3 Purge air (see below)
Arm will not lower 1 Broken return Spring 1 Replace (See your dealer)
2 Lift arm linkage bent or 2 Consult your CLARKE dealer
binding
3 Cylinder ram binding 3 Consult your CLARKE dealer
4 Parts Worn 4 Consult your CLARKE dealer
Jack feels spongy when Air in system Purge air (see System Air Purge)
lifting
SPECIFICATIONS
CTJ2000G CTJ2QLG CTJ2250LS CTJ3QLG CTJ3000LS
CTJ2000GA
Maximum load (tonnes) 2 2 2.25 3 3
Min. Saddle Height (mm) 120 150 110 150 115
Maximum Height (mm) 190 500 525 500 525
Overall Length (mm) 645 633 727 685 727
Overall Width (mm) 345 345 395 350 395
Weight (kg/lbs) 38.5/85 37/81 45.5/100 42/92.5 48/108
Part No. 1600650 7621815 7621015 7621005 7621020
7621010
SPARE PARTS
The following user serviceable parts are available from your Clarke dealer, or Clarke
International Parts Dept.
1. Saddle
2. Castor Assembly
3. Front Wheel Assembly
4. Valve Operating Lever
FAULT FINDING
For Spare Parts and Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
l SYSTEM AIR PURGE
1. Turn handle ONE full turn anticlockwise and pump handle EIGHT full strokes.
2. Turn handle clockwise FULLY, and pump handle to maximum height...then continue to
pump 5 or 6 times to remove trapped air.
3. Turn handle anticlockwise and allow arm to lower and ram to fully retract.
4. Turn handle clockwise FULLY, and pump handle to maximum height to test pump action.
NOTE: It may be necessary to perform the above action more than once to ensure that air is
totally evacuated.
Join the conversation about this product
Here you can share what you think about the Clarke CTJ 2QLG Jack. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.