Home > Garden & Terrace > Water Pumps > Clarke Water Pumps > Clarke CSE 1 Water Pump

Manual Clarke CSE 1 Water Pump

Need a manual for your Clarke CSE 1 Water Pump? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ELECTRICAL CONNECTIONS

All models should have their mains lead connected to a standard 230Volt (50Hz)

electrical supply through an approved plug or a suitably fused isolator switch. We

recommend that these pumps be fitted with a Residual Current Device (RCD).

NOTE: This is mandatory when pump is used for pumping swimming pools and ponds

If the pump is to be connected to an outdoor electrical supply, make sure that

both the plug and the socket are of a BS approved waterproof design.

In the event that the pump is hard wired into the electrical system, it must be

carried out in accordance with IEE regulations.

If used for draining swimming pools or ponds, the pump MUST be fitted with a Residual

Current Device (RCD), with a rated residual operating current of no greater than 30mA.

IMPORTANT:

If you are in any doubt regarding electrical installation,

you should consult a qualified electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the flexible cord of this appliance may not correspond with the

coloured markings identifying terminals in your plug proceed as follows:

• Connect GREEN & YELLOW cord to plug terminal marked with a letter “E” or

Earth symbol “ ” or coloured GREEN or GREEN & YELLOW.

• Connect BROWN cord to plug terminal marked with a letter “L” or coloured RED

• Connect BLUE cord to plug terminal marked with a letter “N” or coloured BLACK

FUSE RATING

The fuse in the plug must be replaced with one of the same rating (13 amps)

and this replacement must be ASTA approved to BS1362.

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e.

non-rewirable) please note:

1. The plug must be thrown away if it is cut from the electric cable. There is a

danger of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct

replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most

electrical outlets

Download manual in English (PDF, 2.07 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Clarke CSE 1 Water Pump by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CSE 1 Water Pump?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CSE 1 Water Pump. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CSE 1 Water Pump. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CSE 1 Water Pump in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.