Home > Miscellaneous > Power Inverters > Clarke Power Inverters > Clarke CI1200B Power Inverter

Manual Clarke CI1200B Power Inverter

Need a manual for your Clarke CI1200B Power Inverter? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

NOTE: The grounding terminal of the AC outlet is connected to the

neutral terminal. This is the same as a standard household power

point where the neutral line is bonded to grounding and there is

normally no voltage between them.

CONNECTING TO POWER SOURCE VIA CIGARETTE LIGHTER PLUG

(CI400B ONLY)

The cigarette lighter plug is suitable for operating the inverter at power

outputs up to 200 Watts. The tip of the plug is positive and the side contact is

negative. Connect the inverter to the power source by inserting the cigarette

lighter plug firmly into the cigarette lighter socket of a vehicle or other DC

power source.

Connect directly to the car battery when operating appliances above 200

Watts.

NOTE: Most vehicle cigarette lighter circuits use fuses rated at 15 to 20

Amps or greater. To operate at full power, either use the battery

clamp cable (supplied) or directly wire to the power source with

suitable wire and fuse (not supplied).

CAUTION: REVERSE POLARITY CONNECTION WILL RESULT IN A BLOWN

FUSE AND MAY CAUSE PERMANENT DAMAGE TO THE INVERTER.

(ALWAYS ENSURE THE LEADS ARE CONNECTED AS BELOW).

CONNECTING TO A POWER SOURCE VIA CABLES

Use the cables provided to connect the inverter directly to the 12 volt power

source using the following guidelines:

1. Check that the inverter power switch is turned OFF and that no flammable

fumes are present.

2. Connect the black cable to the black terminal marked “(-)” on the back

of the inverter. Connect the black battery clip to the negative terminal of

the battery.

3. Connect the red cable to the red terminal marked “(+)”on the back of

the inverter. Connect the red battery clip to the positive terminal of the

battery.

4. Check to ensure that all connections between battery clips and terminals

are clean and secure.

CONNECTING THE LOAD

With the inverter connected to the power source, but switched OFF, ensure

the appliance is also switched off before plugging the cable from the

appliance, into the AC socket on the inverter.

Switch ON the inverter and the green LED will illuminate to indicate that the

Rating

Let us know what you think about the Clarke CI1200B Power Inverter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CI1200B Power Inverter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CI1200B Power Inverter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CI1200B Power Inverter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CI1200B Power Inverter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.