Home > Miscellaneous > Power Inverters > Clarke Power Inverters > Clarke CI1200B Power Inverter

Manual Clarke CI1200B Power Inverter

Need a manual for your Clarke CI1200B Power Inverter? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SYSTEM PROTECTION

The inverter will switch off automatically if the total wattage of the

appliance(s) exceeds the inverter output capacity. This will also happen if the

temperature of the inverter exceeds 65

C due to prolonged use.

The protection circuit will also switch off the output in the case of short-circuit

or overload. If this should happen:

1. Switch off the inverter.

2. Disconnect any appliances.

3. Check all connections.

The inverter can be used again when any faults have been rectified.

When the unit is in continuous operation, the AC output may suddenly stop

although there remains a good supply from the battery. This may be caused

by overheating and the inverter should be switched off until it cools down.

WARNING; Never connect the inverter to the battery with the wrong

polarity. This will damage the unit and invalidate the warranty.

MEASURING AC VOLTAGE

The output wave of the AC inverter is a modified sine-wave. If you choose to

measure the AC output voltage, you must use an authentic RMS volt meter.

Using any other type of voltage measuring device will result in an AC voltage

reading that is up to 20 to 30 volts lower than the rated value. The reading will

only be accurate when using an authentic RMS voltmeter.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _VOLTS PEAK

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ VOLTS RMS

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _0

FUSE REPLACEMENT

If an external fuse on the rear of the unit blows, there is most likely a short

circuit or overload in the DC wiring, or the polarity has been reversed. Find

and correct the problem before replacing the fuses. The quantity and rating

Rating

Let us know what you think about the Clarke CI1200B Power Inverter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CI1200B Power Inverter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CI1200B Power Inverter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CI1200B Power Inverter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CI1200B Power Inverter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.