Home > Do-It-Yourself > Table Saws > Clarke Table Saws > Clarke CCS12 Table Saw

Manual Clarke CCS12 Table Saw

Need a manual for your Clarke CCS12 Table Saw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Wear safety goggles as protection against flying wood chips and saw dust. In many cases,

a full face shield is even better protection. A dust mask is also recommended to keep saw

dust out of your lungs.

Considerable noise is generated by this machine. Ear defenders should always be worn.

Clear the work table of all objects (tools, scraps, rulers etc.), before turning on the saw.

Keep your fingers well away from the blade, use a push stick as you near the end of the

cut.

Switch OFF the saw, and make sure the blade has come to a complete stop before clearing

sawdust or off-cuts from the table.

Make sure there are no nails or foreign objects in the part of the workpiece to be sawn.

Set up the machine and make all adjustments with the power OFF, and disconnected from

the supply.

DO NOT operate the machine with the guards removed. They must all be in place and

securely fastened when performing any operation.

Use ONLY approved replacement saw blades. Contact your local CLARKE dealer for advice.

The use of inferior blades may increase the risk of injury.

DO NOT saw any material that does not have a flat surface on which to bear.

This machine is designed for cutting wood. DO NOT use for cutting metal or plastic

DO NOT attempt to cut round (tubular) work; i.e. logs etc.

Do not feed the workpiece through the blade too fast, hold material firmly and feed into

blade at a moderate speed.

When cutting a large piece of material, support it at the height of the table, or use a table

extension.

Be extra cautious with very large or small, or irregularly shaped workpieces

Never let go of a workpiece. Always maintain control.

Never touch, or hold on to, a piece that has been cut off, whilst the power is ON, or the

blade is rotating.

Ensure the surface, on which the saw stands, is firm, solid and non-slip.

ADDITIONAL SAFETY PRECAUTIONS for TABLE SAWS

Rating

Let us know what you think about the Clarke CCS12 Table Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CCS12 Table Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CCS12 Table Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CCS12 Table Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CCS12 Table Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.