Home > Do-It-Yourself > Belt Sanders > Clarke Belt Sanders > Clarke CAT 165 Belt Sander

Manual Clarke CAT 165 Belt Sander

Need a manual for your Clarke CAT 165 Belt Sander? Below you can view and download the PDF manual for free in English. This product currently has 4 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TROUBLESHOOTING

SYMPTOM PROBLEM SOLUTION

Tool runs at normal

speed but slows down

under any load.

1. Excessive pressure on

sander.

2. Motor parts worn.

3. Worn or sticking

mechanism due to

lack of lubricant.

1. Reduce the force

applied to the sander.

2. Return to Clarke dealer

for repair.

3. Drip air tool lubricating

oil into air inlet. Allow oil

to soak moving parts

before using.

Tool runs slowly. Air flows

weakly from exhaust.

1. Motor parts jammed

with gum/dirt.

2. Regulator in closed

position.

3. General airflow

blocked by dirt.

1. Examine inlet air filter for

cleanliness.

2. Adjust regulator to open

position.

3. Operate tool in short

bursts.

Tool will not run. Air flows

freely from exhaust.

1. Motor vanes stuck

due to buildup of

foreign material.

1. Disconnect air supply

and rotate tool assembly

manually.

2. Try operating tool in

short bursts.

3. Tap motor housing gently

with a rubber mallet.

4. Drip a few drops of air

tool lubricating oil into air

inlet to soak moving

parts.

Tool will not shut off. 1. O-rings damaged or

ill-fitting in seat.

1. Return to Clarke dealer

for repair.

Rating

Let us know what you think about the Clarke CAT 165 Belt Sander by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke CAT 165 Belt Sander?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke CAT 165 Belt Sander. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke CAT 165 Belt Sander. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke CAT 165 Belt Sander in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	CAT 165
Category	Belt Sanders
File type	PDF
File size	2.75 MB

All manuals for Clarke Belt Sanders
More manuals of Belt Sanders

Frequently Asked Questions about Clarke CAT 165 Belt Sander

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Do I need to wear hearing protection when using a sander? Verified

Yes you should. Although the amount of noise produced by a sander can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (9) Read more

Do I need to wear eye protection when using a sander? Verified

Yes. Small particles can fly up during sanding. When these hit an eye they can cause permanent eye damage. That is why it always necessary to wear eye protection.

This was helpful (8) Read more

Do I need to wear a dust mask when using a sander? Verified

Yes. Dust is released during sanding which can cause respiratory damage. Some surfaces can also release chemicals like paint or varnish during sanding. These are also a good reason to wear a dust mask.

This was helpful (7) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more