Home > Car miscellaneous > Jump Starters > Clarke Jump Starters > Clarke BC 420 Jump Starter

Manual Clarke BC 420 Jump Starter

Need a manual for your Clarke BC 420 Jump Starter? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

IMPORTANT: SAFETY PRECAUTIONS

PLEASE READ BEFORE USING THIS UNIT

WARNING

: Some electronic equipment can be damaged by boost

charging or use of start facility. Check your vehicle handbook before using

your Start ’N’ Charge. If in doubt consult the vehicle manufacturer.

Nevertheless, you should not operate this equipment unless you are fully

conversant with vehicle electrical systems, and battery charging techniques.

WARNING

: Because highly inflammable hydrogen gas is released in the

process of battery charging, please remember to switch OFF the charger

first, and so avoid sparking which will occur when CONNECTING OR

DISCONNECTING LIVE LEADS.

3. Black negative (-ve) lead must always be clipped to the negative, and Red

positive (+ve) lead must always be clipped to the positive.

When charging with battery installed in vehicle, or boosting, FIRST connect the

appropriate lead to the UNEARTHED battery terminal (on most modern cars this

is the positive (+ve) terminal), then connect the other lead to the chassis (or a

suitable engine bolt) away from the battery and fuel line. It is advisable to

disconnect the unearthed terminal from the battery, when charging in situ.

When disconnecting, remove the chassis lead FIRST, then the battery lead.

4. To prevent battery overheating and consequent damage, use the BOOST

facility sparingly and do not exceed our recommendations.

5. Battery acid is highly corrosive. If spillage occurs, wipe off immediately and

wash copiously with water. Particularly avoid contact with the eyes, but if this

occurs, you must seek medical advice.

6. When charging is completed, ensure that the vehicle battery leads are

secured to the proper terminals which should be clean and lightly smeared

with petroleum jelly to prevent corrosion. Finally, re-check the electrolyte level.

7. Do not expose this unit to rain.

8. Never touch together the negative and positive leads on this unit whilst the

unit is switched on.

9. Never attempt any electrical or mechanical repair. If you have a problem

with your machine contact your local dealer for service information.

10.

WARNING

: Certain types of sealed or maintenance-free batteries need

extra care when charging. Please consult battery manufacturers instructions

before using this unit.

11.

WARNING

: Since toxic fumes may be released during battery charging,

ONLY USE THIS UNIT IN A WELL VENTILATED AREA.

12. Before charging ensure the battery terminals are clean and that the cells are filled

with electrolyte to the correct level by adding distilled water where necessary.

Rating

Let us know what you think about the Clarke BC 420 Jump Starter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke BC 420 Jump Starter?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke BC 420 Jump Starter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke BC 420 Jump Starter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke BC 420 Jump Starter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	BC 420
Category	Jump Starters
File type	PDF
File size	0.49 MB

All manuals for Clarke Jump Starters
More manuals of Jump Starters

Frequently Asked Questions about Clarke BC 420 Jump Starter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What does mAh mean? Verified

mAh stands for milliampère/hour and indicates the power of a battery. A battery of for example 2000mAh will supply 2000 milliampère per hour and is able to run a radio that uses 250mA per hour for 8 hours. A battery with a higher mAh will have a longer runtime.

This was helpful (69) Read more