Home > Miscellaneous > Watches > Casio Watches > Casio Timeless Collection AQ-S800WD-1EVEF Watch

Manual Casio Timeless Collection AQ-S800WD-1EVEF Watch

Need a manual for your Casio Timeless Collection AQ-S800WD-1EVEF Watch? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Operation Guide 5208

E-20

Alarms

The Alarm Mode lets you configure five daily alarms. You

also can use it to turn the Hourly Time Signal on or off.

• The watch beeps for about 10 seconds when an alarm

time is reached.

• Turning on the Hourly Time Signal causes the watch to

beep on the hour every hour.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C (page

E-9).

Alarm time

(Hour : Minutes)

E-21

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm screens until the one whose

time you want to set is displayed.

AL1 AL2 AL3

SIG AL5 AL4

• The alarm screens are AL1, AL2, AL3, AL4, and AL5.

About 2 seconds

Alarm timeAlarm number

▲

E-22

2. After you select an alarm, hold down A for about two seconds until the hour setting

of the alarm time starts to flash. This is the setting mode.

• This operation turns on the alarm automatically.

3. Press C to move the flashing between the hour and minute settings.

4. While a setting is flashing, use D (+) and B (–) to change it.

5. Press A to exit the setting mode.

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the

watch is in.

• Alarm and Hourly Time Signal operations are performed in accordance with the

Timekeeping Mode time.

• To stop the alarm tone after it starts to sound, press any button.

E-23

To turn an alarm on and off

1. In the Alarm Mode, use D to select an alarm.

2. Press A to toggle it on and off.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select the Hourly Time

Signal (SIG) (page E-21).

2. Press A to toggle it on and off.

Hourly time signal

on indicator

Alarm on indicator

E-24

Countdown Timer

Seconds

Minutes

Timer 1

Dual timers can be set with two different starting times. The watch can be configured

so the two timers alternate, so when one reaches the end of its countdown, the other

timer starts. You can specify a “number of repeats” value from 1 (once) to 10 (ten

times), which controls how many times the two-timer countdown operation is

performed. The starting time of each timer can be set in five-second steps up to 99

minutes, 55 seconds.

▲

2 seconds

Seconds

Minutes

Timer 2

E-25

The watch emits a short beep whenever either of the timers reaches the end of its

countdown during an ongoing timer operation. The watch emits a 5-second beep

when the end of the final timer operation (specified by the number of repeats) is

reached.

• All of the operations in this section are performed in the Countdown Timer Mode,

which you enter by pressing C (page E-9).

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero. The

beeper stops after about 5 seconds or when you press any button.

To configure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the current

countdown start time starts to flash, which indicates the

setting screen.

• If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” (page

E-27) to display it.

E-26

• To disable either timer, set 00'00" as its countdown start time.

4. Press A to exit the setting screen.

Button Operation

Use D (+) and B (–) to change the setting.

Setting

Minutes, Seconds

Number of Repeats

Screen

2. Press C to move the flashing in the sequence shown below to select other

settings.

Timer 1

Minutes

Timer 1

Seconds

Timer 2

Seconds

Timer 2

Minutes

Number of Repeats

3. When the setting you want to change is flashing, use D and B to change it as

described below.

E-27

To use the countdown timer

Press D while in the Countdown Timer Mode to start the countdown timer.

• Pressing A while a countdown is in progress will display the repeat count (current

repeat count/preset number of repeats). The ongoing countdown will reappear

automatically after about two seconds.

• The countdown is performed by alternating between Timer 1 and Timer 2. A short

beep is emitted to signal a changeover from one timer to the other.

•

Pressing

while a countdown timer is stopped resets that time to the start time specified

by you.

• Press D to pause a countdown. Press D again to resume.

• The watch emits a 5-second beep when the end of the final timer operation

(specified by the number of repeats) is reached.

Current timer time

Preset number of repeats

Current repeat countTimer (1 or 2)

(Reset)

(Start/Stop)

▲

2 seconds

E-28

• Even if you exit the Countdown Timer Mode, the countdown timer operation

continues and the watch beeps as required.

• To stop a countdown operation completely, first pause it (by pressing D), and then

press A. This returns the countdown time to its starting value.

E-29

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

• The display range of the stopwatch is 59 minutes, 59.99

seconds.

• The stopwatch continues to run until you stop it. If it

reaches its limit, it restarts from zero.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C

(page E-9).

Minutes

Seconds

Rating

Let us know what you think about the Casio Timeless Collection AQ-S800WD-1EVEF Watch by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Casio Timeless Collection AQ-S800WD-1EVEF Watch?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Casio Timeless Collection AQ-S800WD-1EVEF Watch. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Casio Timeless Collection AQ-S800WD-1EVEF Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio Timeless Collection AQ-S800WD-1EVEF Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Casio
Model	Timeless Collection AQ-S800WD-1EVEF
Category	Watches
File type	PDF
File size	0.43 MB

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio Timeless Collection AQ-S800WD-1EVEF Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

A battery in my device is oxidized, can I still safely use it? Verified

Ja, the device can still be safely used. Firstly, remove the oxidizd battery. Never use bare hands to do this. Then clean the battery compartment with a cotton swab dipped in vinegar or lemon juice. Let it dry and insert new batteries.

This was helpful (807) Read more

My mechanical watch runs fast, what can I do? Verified

This might be caused by exposure to a magnetic field. It can be solved by a demagnetisation process performed by a professional watchmaker.

This was helpful (769) Read more

What do AM and PM stand for? Verified

AM stands for Ante Meridiem and indicates that the time is before midday. PM stands for Post Meridiem and indicates that the time is past midday.

This was helpful (665) Read more

What is a 'Chronograph'? Verified

A 'Chronograph' is literally a 'writer of time'. The term is used to describe clocks and watches that tell the time of day as well as measure a certain period of time, like a stopwatch.

This was helpful (580) Read more

What is GMT? Verified

GMT stands for Greenwich Mean Time (sometimes called UTC, standing for Coordinated Universal Time). It is the time for the longitude 0, that passes through Greenwich near London.

This was helpful (401) Read more

What is a quartz movement? Verified

Watches and clocks with a quartz movement are driven by a battery. This sends an electric current through quartz crystals that will vibrate. These vibrations are passed on to the movement. Because the vibrations have a fixed frequency, watches and clocks with a quartz movement are extremely precise.

This was helpful (401) Read more

There is moisture on the inside of the glass of my Casio watch, what should I do? Verified

Casio states that if the moisture appeared after an extreme change in temperature and disappears relatively quickly afterwards, there is probably nothing wrong. If the moisture does not disappear, you should have your watch repaired as soon as possible.

This was helpful (57) Read more