Manual Casio G-Shock GWN-1000B-1BER Watch

Manual

MO1405-EA

© 2014 CASIO COMPUTER CO., LTD.

E-1

ENGLISH

Congratulations upon your selection of this CASIO watch.

Applications

The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.

Measured values are then shown on the display. Such features make this watch useful when hiking,

mountain climbing, or when engaging in other such outdoor activities.

Warning !

• The measurement functions built into this watch are not intended for taking measurements that

require professional or industrial precision. Values produced by this watch should be considered

as reasonable representations only.

•

When engaging in mountain climbing or other activities in which losing your way can create a

dangerous or life-threatening situation, always use a second compass to confi rm direction readings.

• Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss

suffered by you or any third party arising through the use of this product or its malfunction.

E-2

Important!

• The watch’s Altimeter Mode calculates and displays relative altitude based on barometric pressure

readings produced by its pressure sensor. This means that readings taken at different times at the

same location may produce different altitude values due to changes in barometric pressure. Also note

that the value displayed by the watch may be different from the actual elevation and/or sea level

elevation indicated for the area where you are located.

• When using the altimeter of this watch for mountain climbing or other activities, it is highly

recommended that you check a map, local altitude indications, or some other source for your current

correct altitude and regularly calibrate the altimeter with the latest information. For more information,

see “To specify a reference altitude value” (page E-66).

• Whenever you use the digital compass of this watch for serious trekking, mountain climbing, or other

activities, be sure always to take along another compass to confi rm readings. If the readings produced

by the digital compass of this watch are different from those of the other compass, perform bidirectional

calibration of the digital compass to ensure more accurate readings.

• Direction readings and digital compass calibration will not be possible if the watch is in the vicinity of a

permanent magnet (magnetic accessory, etc.), metal objects, high-voltage wires, aerial wires, or

electrical household appliances (TV, computer, cellphone, etc.)

E-3

About This Manual

• Depending on the model of your watch, digital display text appears

either as dark fi gures on a light background, or light fi gures on a dark

background. All examples in this manual are shown using dark fi gures

on a light background.

• Button operations are indicated using the letters shown in the

illustration.

• Note that the product illustrations in this manual are intended for

reference only, and so the actual product may appear somewhat

different than depicted by an illustration.

Crown

Small hand

Second Hand

Minute HandHour Hand

Crown

Small hand

Second Hand

Minute HandHour Hand

E-4

Using the Crown

This watch has a lock-type crown.

Important!

• You should keep the crown locked during normal daily use. Leaving the crown unlocked creates the

risk of unintended operations or even damage due to impact.

To lock the crown

1. Push the crown back in (see “To pull out, rotate, or push the crown in”

below).

• Note that attempting to lock the crown when it is not pushed in can

cause unexpected watch operation.

2. Rotate the crown so Mark 1 is aligned with Mark 2.

3. While pushing in on the crown (a), rotate it to the right (b) until it stops,

and align Mark 1 with Mark 3.

4. Gently pull on the crown to make sure it is securely locked and does

not come out.

To unlock the crown

Rotate the crown so Mark 1 aligns with Mark 2.

b

a

Mark 2

Mark 1

Mark 1

Mark 3

b

a

Mark 2

Mark 1

Mark 1

Mark 3

E-5

To pull out, rotate, or push the crown in

Important!

• Before performing any of these operations, fi rst unlock the crown.

The illustrations below show the different crown operations.

Pull out Rotate Push in

E-6

High-speed Movement

You can use either of the crown operations described below to move watch hands or indicators at high

speed.

HS1: Can be used to move both hands and display indicators.

HS2: Can be used when setting the hour and minute manually to move the hands at high speed.

To start HS1 high-speed movement

While the crown is pulled out, rotate it rapidly three turns away from you (for

forward movement) or towards you (for reverse movement). High-speed

movement will continue even if you release the crown.

To start HS2 high-speed movement

While HS1 high-speed movement is in progress, again rotate the crown rapidly

three turns in the same direction as the current HS1 movement (away from you

for forward movement or towards you for reverse movement).

To stop high-speed movement

Rotate the crown in the direction that is opposite that of the current high-speed

movement or press any button.

E-7

Note

• If you do not perform any operation for more than two minutes after pulling out the crown, the indicator

shown below will appear and crown operations will become disabled. If this happens, push the crown

back in and then pull it out again to re-enable crown operations.

• Even if the indicator shown below appears immediately after you pull out the crown, crown operations

are disabled. If this happens, push the crown back in and lock it.

1 second

• You can use high-speed movement in the following cases: when changing the time and/or date setting

in the Timekeeping Mode, Countdown Timer Mode, or Alarm Mode, or when performing magnetic

declination angle calibration, altitude calibration, barometric pressure calibration, or temperature

calibration operations.

Operation Guide 5371

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio G-Shock GWN-1000B-1BER Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio G-Shock GWN-1000B-1BER Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio G-Shock GWN-1000B-1BER Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.