Manual Casio G-Shock GA-700BCE-1AER Watch

Manual

Operation Guide 5522

E-59

Countdown Timer:

Measuring unit: 1/10 second

Countdown range: 60 minutes

Countdown start time setting range: 1 to 60 minutes (1-minute increments)

World Time: 48 cities (31 time zones)

Other: Daylight Saving Time/Standard Time; Home City/World Time City

switching

Alarms: 5 Daily alarms (with 1 snooze alarm); Hourly time signal

Illumination: LED (light-emitting diode); Selectable illumination duration

(approximately 1.5 seconds or 3 seconds)

Other: Button operation tone on/off; Moving the Hands to View the Digital Display

E-58

Specifications

Accuracy at normal temperature: ±15 seconds a month

Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the

week

Time format: 12-hour and 24-hour

Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099

Other: Home City code (can be assigned one of 48 city codes);

Standard Time/Daylight Saving Time (summer time)

Analog Timekeeping: Hour, minutes (hand moves every 20seconds)

Stopwatch:

Measuring unit: 1/100 second

Measuring capacity: 23:59' 59.99"

Measuring modes: Elapsed time, split time, two finishes, Direct timing start from

the Timekeeping Mode, Target Time Alarm

E-57

* Graphic display in each mode occurs as described below.

Mode Flashing

Timekeeping Appears and disappears in time with the seconds of

the current time.

Stopwatch Flashes in time with the minutes.

Countdown Timer Flashes in time with the minutes.

World Time Appears and disappears in time with the seconds of

the current time in the World Time zone.

E-56

Main Indicators

Number Name See

1

1

Graphic* E-57

2

2

Target Time operation in

progress

E-30

3

3

PM indicator E-17

4

4

Snooze alarm on indicator E-46

5

5

Alarm on indicator E-44

6

6

Hourly time signal on indicator E-46

7

7

DST indicator E-20, E-41

8

8

Hands shifted indicator E-14

2

1

7 8643 5

E-55

World Time Mode

■ The time for my World Time City is off in the World Time Mode.

This could be due to incorrect switching between standard time and daylight saving

time. See “To specify standard time or daylight saving time (DST) for a city” (page E-41)

for more information.

E-54

Troubleshooting

Hand Movement and Indications

■ The time indicated by the hands is different from the digital time.

This could indicate that the watch has been exposed to magnetism or strong

impact, which has caused problems with proper hand alignment. Adjust the watch’s

hand home position alignment (page E-49).

Time Setting

■ The current time setting is off by hours.

Your Home City setting may be wrong (page E-18). Check your Home City setting and

correct it, if necessary.

■ The current time setting is off by one hour.

You may need to change your Home City’s standard time/daylight saving time

(DST) setting. Use the procedure under “Adjusting the Digital Time and Date

Settings” (page E-21) to change the standard time/daylight saving time (DST) setting.

E-53

3. Press D to toggle the setting between KEY (ON) and MUTE (OFF).

4. After all the settings are the way you want, press A to exit the setting screen.

E-52

Button Operation Tone

You can turn the button operation tone on or off as

desired.

x Even if you turn off the button operation tone, the

Target Time Alarm, alarms, the Hourly Time Signal,

and other beepers all operate normally.

To turn the button operation tone on and off

1. In the Timekeeping Mode, hold down A until the

flashing SET Hold indicator disappears from the

display and the currently selected city code flashes

on the left side of the lower display.

2. Press C nine times to display the button operation

tone On/Off screen (page E-22).

The screen will show either KEY

or MUTE.

E-51

2. If the hour and minute hands are not at 12o’clock,

use D (+) and B (–) to adjust them until they are.

x Holding down either button moves the hands at

high speed.

3. Press A to return to the Timekeeping Mode.

Check to make sure that the time indicated by the

hands matches the time on the digital display. If the

times don’t match, perform the correction procedure

above again.

Hour hand and minute hand

E-50

1. In the Timekeeping Mode, hold down A for about five

seconds until 0:00 starts to flash. Release A after

0:00 flashes.

x This enters the hour and minute hand adjustment

mode.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio G-Shock GA-700BCE-1AER Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio G-Shock GA-700BCE-1AER Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio G-Shock GA-700BCE-1AER Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio G-Shock MRG-BF1000R-1ADR Watch

Manual

Casio G-Shock DW-5900TD-9ER Watch

Manual

Casio Collection WS-1600H-1AVEF Watch

Manual

Casio Edifice EFR-552L-5AVUEF Watch

Manual

Casio Collection MTP-B145D-9AVEF Watch

Manual

Casio Sheen SHE-3517D-2AUEF Watch

Manual

Casio Collection WS-1700H-5AVEF Watch

Manual

Casio Collection LTP-1302PRG-3AVEF Watch

Related categories