Manual Casio G-Shock DW-D5600NH-1DR Watch

Manual

Operation Guide 3433

E-19

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero.

x When the progress beeper is turned off, the countdown end beeper sounds for

about 10 seconds, or until you press any button to stop it.

x When the progress beeper is turned on, the countdown end beeper sounds for

about one second.

Progress Beeper

When the progress beeper is turned on, the watch uses beeps to signal countdown

progress as described below.

x Starting from fi ve minutes before the end of the countdown, the watch emits four

short beeps at the top of each countdown minute.

x 30 seconds before the end of the countdown, the watch emits four short beeps.

x The watch emits a short beep for each of the last 10 seconds of the countdown.

x If the countdown start time is six minutes or greater, the watch emits a short beep

for each second of the fi nal 10 seconds before the fi ve-minute point is reached. Four

short beeps are emitted to signal when the fi ve-minute point is reached.

E-18

Auto-repeat

When auto-repeat is turned on, the countdown restarts automatically from the

countdown start time when it reaches zero.

When auto-repeat is turned off, the countdown stops when it reaches zero and the

display shows the original countdown start time.

x Pressing D while an auto-repeat countdown is in progress pauses the current

countdown. You can resume the auto-repeat countdown by pressing D, or you can

press A to reset to the countdown time starting value.

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep informed

about the countdown status without looking at the display. The following describes the

types of beeper operations the watch performs during a countdown.

E-17

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero. The countdown timer also has an auto-

repeat feature and a progress beeper that signals the

progress of the countdown.

x All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-5).

Confi guring the Countdown Timer

The following are the settings you should confi gure before

actually using the countdown timer.

Countdown start time; Auto-repeat on/off; Progress beeper

on/off

x See “To confi gure the countdown timer” (page E-20) for

information about setting up the timer.

Hours

Minutes

Seconds

E-16

About Auto-Start

With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation

starts automatically when the countdown reaches zero.

During the fi nal three seconds of the countdown, a beeper sounds with each second.

To use Auto-Start

1. While the stopwatch screen is showing all zeros in the

Stopwatch Mode, press A.

x This displays a 5-second countdown screen.

x To return to the all zeros screen, press A again.

2. Press D to start the countdown.

x When the countdown reaches zero, a tone sounds and a

stopwatch timing operation starts automatically.

x Pressing D while the Auto-Start countdown is in

progress starts the stopwatch immediately.

E-15

To measure times with the stopwatch

Elapsed time

D D D D A

Start Stop Resume Stop Clear

Split time

D A A D A

Start Split

(SPL displayed)

Split release Stop Clear

Two Finishes

D A D A A

Start Split

First runner

fi nishes.

Display time of

fi rst runner.

Stop

Second runner

fi nishes.

Split release

Display time of

second runner.

Clear

E-14

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two fi nishes. It also includes Auto-Start.

x The display range of the stopwatch is 23 hours,

59 minutes, 59.99 seconds.

x The stopwatch continues to run, restarting from zero after

it reaches its limit, until you stop it.

x The stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

x Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to elapsed

time measurement.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-5).

1/100 second

Hours

Minutes

Seconds

E-13

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

whose Standard Time/Daylight Saving Time setting you

want to change.

2. Hold down A for about one second to toggle Daylight

Saving Time (DST displayed) and Standard Time (DST

not displayed).

x The DST indicator is on the display whenever you display

a city code for which Daylight Saving Time is turned on.

x Note that the DST/Standard Time setting affects only

the currently displayed city code. Other city codes are

not affected.

DST indicator

E-12

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

x All of the operations in this section are performed in

the World Time Mode, which you enter by pressing C

(page E-4).

To view the time for another city code

In the World Time Mode, press D to scroll eastwardly

through city codes.

x For full information about city codes, see the “City Code

Table” at the back of this manual.

x If the current time for a city is wrong, check your

Timekeeping Mode time and the UTC offset settings and

make necessary changes.

City code

Current time and date in

selected city

E-11

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

x With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

E-10

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to fl ash, which indicates the setting

screen.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time

(

displayed) and Standard Time ( displayed).

4. Press A to exit the setting screen.

x The DST indicator appears on the display to indicate that

Daylight Saving Time is turned on.

DST indicator

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio G-Shock DW-D5600NH-1DR Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio G-Shock DW-D5600NH-1DR Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio G-Shock DW-D5600NH-1DR Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio Collection WS-1700H-5AVEF Watch

Manual

Casio G-Shock GM-2100WS-7AER Watch

Manual

Casio Edifice EFV-150L-1AVUEF Watch

Manual

Casio Collection MTP-E173B-1AVEF Watch

Manual

Casio Edifice ECB-30D-1AEF Watch

Manual

Casio G-Shock GX-56RC-1ER Watch

Manual

Casio Collection W-219HD-1AVEF Watch

Manual

Casio G-Shock DW-H5600MB-1ER Watch

Related categories