Manual Casio G-Shock DW-5600THC-1ER Watch

Manual

Operation Guide 3229/3421

E-10

Mode indicator

Alarm on indicator

DayMonth

Minutes

Hour

Hourly time signal

on indicator

Alarm

You can set an alarm with hour, minutes, month, and

day. When the alarm is on, the alarm sounds for

20 seconds at the preset time. When the Hourly Time

Signal is on, the watch beeps every hour on the hour.

Alarm Types

The types of alarm you get depends on the information

you set.

• To set a daily alarm

Set the hour and minutes for the alarm time. Set “–”

for the month and “– –” for the day (see step 3 under

“To set the alarm time”). This type of setting causes

the alarm to sound every day at the time you set.

• To set a date alarm

Set the month, day, hour and minutes for the alarm

time. This type of setting causes the alarm to sound

at the specific time, on the specific date you set.

E-11

• To set a 1-month alarm

Set the month, hour and minutes for the alarm time. Set “– –” for the day (see step

3 under “To set the alarm time”). This type of setting causes the alarm to sound

every day at the time you set, only during the month you set.

• To set a monthly alarm

Set the day, hour and minutes for the alarm time. Set “–” for the month (see step 3

under “To set the alarm time”). This type of setting causes the alarm to sound every

month at the time you set, on the day you set.

To set the alarm time

1. Press A while in the Alarm Mode until the hour digits start to flash on the display.

The hour digits flash because they are

selected

.

• At this time, the alarm is automatically switched on.

2. Press C to change the selection in the following sequence.

Hour

Day

Minutes

Month

E-12

3. Press B to increase the selected digits. Holding down B changes the number at

high speed.

• The format (12-hour and 24-hour) of the alarm time matches the format you select

for normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning or afternoon.

4. After you set the alarm time, press A to return to the Alarm Mode.

• If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Alarm Mode automatically.

E-13

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch an alarm and Hourly Time Signal on and off

Press B while in the Alarm Mode to change the status of an alarm (see “Alarm

Types” on page E-10) and Hourly Time Signal in the following sequence.

Both off Both onAlarm only Hourly Time Signal only

Hourly time signal on indicator

Alarm on indicator

E-14

Mode indicator

Minutes

SecondsHours

Current time

Countdown Timer

The countdown timer can be set within a range of 1

second to 24 hours. When the countdown reaches

zero, an alarm sounds for 10 seconds or until you press

any button.

To set the countdown time

1. Press A while in the Countdown Timer Mode. The

hours digit flashes on the display because it is

selected

.

2. Press C to change the selection in the following

sequence.

Seconds

Minutes

Hours

E-15

3. Press B to increase the selected number. Holding down B changes the number

at high speed.

• To set the starting value of the countdown time to 24 hours, set 0:00' 00.

4. After you set the countdown time, press A to return to the Countdown Timer Mode.

• If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Countdown Timer Mode automatically.

To use the countdown timer

1. Press B while in the Countdown Timer Mode to start the countdown timer.

2. Press B again to stop the countdown timer.

• You can continue countdown timer operation by pressing B.

3. Stop the timer and then press A until the countdown time is reset to its starting

value.

• When the end of the countdown is reached and auto repeat timing is off, the alarm

sounds for 10 seconds or until you stop the alarm by pressing any button. Countdown

timing stops, and the countdown time is automatically reset to its starting value

after the alarm stops.

E-16

Auto repeat on indicator

1. Press A while in the Countdown Timer Mode. The

hours digit flashes on the display because it is

selected

.

2. Press D to switch auto repeat on and off.

3. Press A to return to the Countdown Timer Mode.

• When the end of the countdown is reached while

auto repeat is on, the alarm sounds, but the

starting countdown time is reset and countdown

timing starts again automatically whenever the

countdown reaches zero. You can stop timing by

pressing B, and manually reset to the starting

countdown time by pressing A.

To switch auto repeat timing on and off

E-17

Current time

Mode indicator

Minutes

Seconds

1/100 second

The Stopwatch Mode lets you measure elapsed time,

split times, and two finishes. The range of the

stopwatch is 23 hours, 59 minutes, 59 seconds.

To measure elapsed time

1. Press B to start the stopwatch.

2. Press B to stop the stopwatch.

• You can resume the measurement operation by

pressing B again.

3. Press A to clear the stopwatch to all zeros.

• For the first 60 minutes, the display shows minutes,

seconds, and 1/100 second. After 60 minutes, the

display format changes to show hours, minutes, and

seconds.

Stopwatch

E-18

To record split times

1. Press B to start the stopwatch.

2. Press A to display the timing up to that point. Stopwatch timing continues internally.

3. Press A to clear the split time and to continue time measurement on the display.

• You can repeat steps 2 and 3 as many times as you want.

4. Press B to stop the time measurement.

5. Press A to clear the stopwatch to all zeros.

To time first and second place finishes

1. Press B to start the stopwatch.

2. Press A when the first finisher crosses the line, and record the time.

3. Press B when the second finisher crosses the line.

4. Press A to display the finishing time of the second finisher.

5. Press A again to clear the stopwatch to all zeros.

E-19

Specifications

Accuracy at normal temperature: ±15 seconds a month

Timekeeping: Hour, minutes, seconds, pm (PM), month, day, the day of the week

Time system: Switchable between 12-hour and 24-hour formats

Calendar system: Auto-calendar pre-programmed from the year 2000 to 2099

Alarm: Multi-function alarm, hourly time signal

Countdown Timer

Measuring unit: 1 second

Input range: from 1 second to 24 hours

Other: Auto-repeat function

Stopwatch

Measuring units: 1/100 second (for the first 60 minutes)

1 second (after 60 minutes)

Measuring capacity: 23 hours, 59 minutes, 59 seconds

Measuring modes: Elapsed time, split time and two finishes

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio G-Shock DW-5600THC-1ER Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio G-Shock DW-5600THC-1ER Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio G-Shock DW-5600THC-1ER Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio G-Shock MTG-B3000PRB-1AER Watch

Manual

Casio G-Shock GMW-B5000PG-9ER Watch

Manual

Casio Collection WS-1400H-1BVEF Watch

Manual

Casio G-Shock GW-9500-1ER Watch

Manual

Casio Collection LA-20WHS-4AEF Watch

Manual

Casio G-Shock GM-B2100BD-1AER Watch

Manual

Casio Sheen SHE-3517D-2AUEF Watch

Manual

Casio G-Shock GA-700BCE-1AER Watch

Related categories