Manual Casio Collection MWD-100H-9AVEF Watch

Manual

Operation Guide 3487

E-19

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes.

x The display range of the stopwatch is 23 hours,

59minutes, 59.99 seconds.

x The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

x An ongoing elapsed time measurement operation

will continue internally even if you change to another

mode. However, if you exit the Stopwatch Mode while

a split time is displayed, the split time will not be

displayed when you return to the Stopwatch Mode.

x All of the operations in this section are performed in

the Stopwatch Mode, which you enter by pressing C

(page E-5).

Minutes

Seconds

Hours

1/100 second

E-18

To turn auto-repeat on and off

1. In the Countdown Timer Mode, hold down A until the

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press B to toggle auto-repeat on (

displayed) and off

(

not displayed).

x Note that pressing B in the above operation also

turns on the backlight.

x When the end of the countdown is reached while auto-

repeat is on, the alarm sounds, but the countdown

restarts from the beginning without stopping. You

can stop the countdown by pressing

D

and manually

reset to the start time by pressing

A

.

x The auto-repeat indicator appears in the Countdown

Timer Mode only.

Auto-repeat indicator

E-17

x The countdown timer measurement operation continues even if you exit the

Countdown Timer Mode.

x Press D while a countdown operation is in progress to pause it. Press D

again to resume the countdown.

x To completely stop a countdown operation, first pause it (by pressing D), and

then press A. This returns the countdown time to its starting value.

To set the countdown start time

1. In the Countdown Timer Mode, hold down A until the

hours setting of the countdown start time starts to flash,

which indicates the setting screen.

2. Press C to move the flashing between the hours and

minutes settings.

3. While a setting is flashing, use D to increase it.

x To set the starting value of the countdown time to

24 hours, set 0:00.

4. Press A to exit the setting screen.

E-16

Countdown Timer

The countdown timer can be set within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero.

x You can also select auto-repeat, which automatically

restarts the countdown from the original value you set

whenever zero is reached.

x All of the operations in this section are performed

in the Countdown Timer Mode, which you enter by

pressing C (page E-5).

To use the countdown timer

Press D while in the Countdown Timer Mode to start the

countdown timer.

x When the end of the countdown is reached and auto-repeat is turned off, the

alarm sounds for 10 seconds or until you stop it by pressing any button. The

countdown time is automatically reset to its starting value after the alarm stops.

Minutes

Seconds

Hours

E-15

To select the operation of Alarm 1

1. In the Alarm Mode, use D to select Alarm 1.

2. Press A to cycle through the available settings in the sequence shown below.

Snooze on indicator (SNZ) and Alarm 1 on indicator

AAA

Alarm on Snooze

alarm on

Alarm off

x The snooze on indicator (SNZ) and Alarm 1 on indicator are displayed in all

modes.

x The snooze on indicator (SNZ) flashes during the 5-minute intervals between

alarms.

x The alarm indicator (Alarm 1 on and/or snooze on) flashes while the alarm is

sounding.

E-14

To turn Alarms 2 through 5 and the Hourly Time Signal on and off

1. In the Alarm Mode, use D to select alarm number 2

through 5, or the Hourly Time Signal (:00).

2. Press A to toggle it on and off.

x The on/off status of Alarms 2 through 5 and the Hourly

Time Signal is shown by indicators.

x The alarm on indicators and Hourly time Signal on

indicator are displayed in all modes.

x While an alarm is sounding, the applicable alarm on

indicator flashes on the display.

Hourly time signal on

indicator

Alarm on indicator

E-13

Alarm Operation

The alarm tone sounds at the preset time for 10 seconds, regardless of the mode

the watch is in. In the case of the snooze alarm, the alarm operation is performed a

total of seven times, every five minutes, until you turn the alarm off or change it to a

one-time alarm (page E-14).

x To stop the alarm tone after it starts to sound, press any button.

x Performing any one of the following operations during a 5-minute interval

between snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen (page E-6)

Displaying the alarm 1 setting screen (page E-11)

To test the alarm

x In the Alarm Mode, hold down D to sound the alarm.

E-12

3. Press C to move the flashing in the sequence shown below to select other

settings.

C

Hour Minutes Day

CC

Month

C

4. While a setting is flashing, press D to increase it.

x To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set – for the month. Press D until the – mark appears (between 12 and 1)

while month setting is flashing.

x To set an alarm that does not include a day (Daily alarm, 1-Month alarm), set

– – for the day. Press D until the – – mark appears (between the end of the

month and 1) while the day setting is flashing.

x When setting the alarm time using the 12-hour format, take care to set the

time correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

E-11

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

DD

D

–1 –2 –3

:00 –4–5

DD

D

x Alarm 1 has a snooze feature.

x The snooze alarm operation repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash, which indicates the setting screen.

x This operation automatically turns on the alarm.

E-10

Alarm Types

The alarm type is determined by the settings you make, as described below.

x Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

x Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

x 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

x Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the

alarm to sound every month at time you set, on the day you set.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio Collection MWD-100H-9AVEF Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio Collection MWD-100H-9AVEF Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio Collection MWD-100H-9AVEF Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio G-Shock MRG-BF1000R-1ADR Watch

Manual

Casio G-Shock GWG-B1000-3AER Watch

Manual

Casio Sheen SHE-4554GYM-8AUEF Watch

Manual

Casio Edifice EQS-940NL-1AVUEF Watch

Manual

Casio G-Shock GD-350GB-1ER Watch

Manual

Casio Pro Trek PRW-35-1AER Watch

Manual

Casio G-Shock GPR-H1000-9ER Watch

Manual

Casio Collection WS-1300H-1AVEF Watch

Related categories