Manual Casio Collection F-200W-1AEG Watch

Manual

USER’S GUIDE 2518

1

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

• In any mode, hold down C for about two seconds to return to the

Timekeeping Mode.

Timekeeping Mode

Alarm Mode Stopwatch Mode Dual Time Mode

Press .

Timekeeping

Use the Timekeeping Mode to set and view the

current time and date.

To set the time and date

1.In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2.Press C to move the flashing in the sequence

shown below to select other settings.

Seconds Hour

Minutes

Day Month

Year

Hour : Minutes Seconds

Day of week

PM indicator

Month – Day

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping

and 24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and no indicator appears to

the left of the hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode

is applied in all other modes.

Alarm

The multi-function alarm lets you specify the hour,

minutes, month, and day for the alarm. You can set up

the alarm so it sounds once when the alarm time is

reached, or for a snooze alarm that repeats up to seven

times, every five minutes.

You can also turn on an Hourly Time Signal that causes

the watch to beep twice every hour on the hour.

• Pressing D in the Alarm Mode toggles between

the alarm screen (Alarm time displayed) and the

Hourly Time Signal screen (

:00

displayed).

• An alarm setting (and an Hourly Time Signal

setting) is available in the Alarm Mode, which you

enter by pressing C.

Month – Day

Hour : Minutes

Alarm Types

The alarm type is determined by the settings you make, as described below.

••

••

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at the time you set.

••

••

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting

causes the alarm to sound at the specific time, on the specific date you set.

••

••

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes

the alarm to sound everyday at time you set, only during the month you set.

••

••

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound every month at time you set, on the day you set.

4. While a setting is flashing, press D to increase it.

• To set an alarm that does not include a month (Daily alarm, Monthly

alarm), set x for the month. Press D until the x mark appears (between

12 and 1) while month setting is flashing.

• To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set xx for the day. Press D until the xx mark appears (between the end

of the month and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set the

time correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm tone sounds at the preset time for about 10 seconds. In the case of

the snooze alarm, the alarm repeats up to seven times every five minutes.

• Pressing any button stops the alarm tone operation.

• The alarm and the Hourly Time Signal sound in all modes.

To set an alarm time

1.In the Alarm Mode, press D to display the alarm

screen.

2.Hold down A until the hour setting of the alarm

time starts to flash, which indicates the setting

screen.

• This operation automatically turns on the one-

time alarm.

3.Press C to move the flashing in the sequence

shown below to select other settings.

Hour Minutes

Month Day

To select the alarm type

1.In the Alarm Mode, press D to display the alarm

screen.

2.Press A to cycle through the available alarm

settings shown below.

One-time

alarm on

Alarm off

[Module 2518]

[Module 2519]

Snooze

alarm on

• The alarm on indicator and the snooze alarm on

indicator are shown on the display in all modes

while these functions are turned on.

• The snooze alarm on indicator flashes during the

5-minute intervals between alarms.

• Displaying the Alarm Mode setting screen automatically changes the alarm

type to one-time alarm.

• Changing the Timekeeping Mode setting screen during a 5-minute interval

between snooze alarms stops the current snooze alarm operation (but

snooze alarm remains as the alarm type setting).

• If a snooze alarm time is reached while you are setting the current time in the

Timekeeping Mode, the alarm sounds only once. Subsequent snooze alarm

operations are not performed.

Stopping a Snooze Alarm Operation

After a snooze alarm time is reached, you can perform the following steps

during any 5-minute interval between alarms to stop the snooze alarm

operation.

To stop a Snooze Alarm Operation

1. While in the Alarm Mode, press D to display the alarm screen.

2. Next, press A to turn off the alarm or to select the one-time alarm.

• Note that this also changes the alarm type setting. If you want to use the

snooze alarm again, you must re-select it as the alarm type. See “To select

the alarm type” for more information.

[Module 2518]

[Module 2519]

Alarm on/off indicator

To test the alarm

• In the Alarm Mode, hold down D to sound the alarm.

To turn the Hourly Time Signal on and off

1. In the Alarm Mode, press D to display the Hourly Time Signal screen.

2. Press A to turn it on and off.

Indicates Hourly Time Signal is on.

Indicates Hourly Time Signal is off.

• The Hourly Time Signal on indicator is shown on the display in all modes

while this function is turned on.

[Module 2518] [Module 2519]

3. When the setting you want to change is flashing, press D to change it as

described below.

To change this setting

Seconds

Hour, Minutes, Year, Month, Day

Perform this button operation

Press D to reset to 00.

Press D to increase the setting.

• Pressing D while the seconds are in the range of 30 to 59 resets them to

00 and adds 1 to the minutes. In the range of 00 to 29, the minutes are

unchanged.

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date

(year, month, and day) settings.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar automatically makes allowances

for different month lengths and leap years. Once you set the date, there

should be no reason to change it except after you have the watch’s battery

replaced.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio Collection F-200W-1AEG Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio Collection F-200W-1AEG Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio Collection F-200W-1AEG Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio Sheen SHE-4550D-2AUER Watch

Manual

Casio Edifice ECB-40MP-1AEF Watch

Manual

Casio G-Shock GA-110CD-1A3ER Watch

Manual

Casio Edifice EFR-574D-2AVUEF Watch

Manual

Casio Collection MTP-E700D-7EVEF Watch

Manual

Casio Edifice EQB-2000DB-1AER Watch

Manual

Casio G-Shock GST-B500BD-1A9ER Watch

Manual

Casio Edifice ECB-950DC-1AEF Watch

Related categories