Manual Casio Baby-G BLX-560-7ER Watch

Manual

Operation Guide 3296

E-20

3. While a setting is flashing, use D (+) or B (–) to change it.

• You can specify a date in the range of January 1, 2000 to December 31, 2099.

4. Press A to exit the setting screen.

5. Use A to display either the Tide Data screen or the Moon Data screen.

E-21

World Time

World Time shows the current time in 48 cities (29 time

zones) around the world.

• The times kept in the World Time Mode are

synchronized with the time being kept in the

Timekeeping Mode. If you feel that there is an error in

any World Time Mode time, check the UTC differential of

your Home Site Data (Home City) and the current

setting of the Timekeeping Mode time.

• Select a city code in the World Time Mode to display the

current time in any particular time zone around the

globe. See the “UTC Differential/City Code List” at the

back of this manual for information about the UTC

differential settings that are supported.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C

(page E-7).

City code

Current time in

selected city

E-22

To view the time in another city

While in the World Time Mode, press D (eastward) to scroll through the city codes

(time zones).

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D to display the city code

(time zone) whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A to toggle between Daylight Saving Time

(DST indicator displayed) and Standard Time (DST

indicator not displayed).

• The DST indicator is shown on the World Time Mode

screen while Daylight Saving Time is turned on.

• Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

DST indicator

E-23

Stopwatch

The stopwatch lets you measure elapsed time, split times,

and two finishes. It also includes Auto-Start.

• The display range of the stopwatch is 23 hours, 59

minutes, 59.99 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• Exiting the Stopwatch Mode while a split time is frozen

on the display clears the split time and returns to

elapsed time measurement.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C (page

E-7).

1/100 second

Hours

Minutes

Seconds

E-24

To measure times with the stopwatch

D

Start Stop

Elapsed Time

➤

Re-start Clear

D

➤

Stop

D

➤

D

➤

A

Split Time

D

Start Split

➤

Split release

Clear

A

➤

Stop

A

➤

D

➤

A

Two Finishes

D

Split

➤

Stop

Clear

A

➤

Split release

D

➤

A

➤

A

First runner

finishes.

Display time of

first runner.

Second runner

finishes.

Display time of

second runner.

(SPL displayed)

Start

E-25

About Auto-Start

With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation

starts automatically when the countdown reaches zero.

During the final three seconds of the countdown, a beeper sounds with each second.

To use Auto-Start

1. While the stopwatch screen is showing all zeros in the

Stopwatch Mode, press A.

• This displays a 5-second countdown screen.

• To return to the all zeros screen, press A again.

2. Press D to start the countdown.

• When the countdown reaches zero, a tone sounds and a

stopwatch timing operation starts automatically.

• Pressing D while the Auto-Start countdown is in

progress will start the stopwatch immediately.

E-26

Countdown Timer

You can set the countdown timer within a range of one

minute to 24 hours. An alarm sounds when the countdown

reaches zero. The countdown timer also has an

auto

-

repeat feature and a progress beeper that signals

the progress of the countdown.

• All of the operations in this section are performed in the

Countdown Timer Mode, which you enter by pressing

C (page E-7).

Configuring the Countdown Timer

The following are the settings you should configure before

actually using the countdown timer.

Countdown start time; Auto-repeat on/off; Progress

beeper on/off

• See “To configure the countdown timer” (page E-29) for

information about setting up the timer.

Hours

Minutes

Seconds

E-27

Auto-repeat

When auto-repeat is turned on, the countdown restarts automatically from the

countdown start time when it reaches zero.

When auto-repeat is turned off, the countdown stops when it reaches zero and the

display shows the original countdown start time.

• Pressing D while an auto-repeat countdown is in progress pauses the current

countdown. You can resume the auto-repeat countdown by pressing D, or you can

press A to reset to the countdown time starting value.

Countdown Timer Beeper Operations

The watch beeps at various times during a countdown so you can keep informed

about the countdown status without looking at the display. The following describes the

types of beeper operations the watch performs during a countdown.

E-28

Countdown End Beeper

The countdown end beeper lets you know when the countdown reaches zero.

• When the progress beeper is turned off, the countdown end beeper sounds for

about 10 seconds, or until you press any button to stop it.

• When the progress beeper is turned on, the countdown end beeper sounds for

about one second.

Progress Beeper

When the progress beeper is turned on, the watch uses beeps to signal countdown

progress as described below.

• Starting from five minutes before the end of the countdown, the watch emits four

short beeps at the top of each countdown minute.

• 30 seconds before the end of the countdown, the watch emits four short beeps.

• The watch emits a short beep for each of the last 10 seconds of the countdown.

• If the countdown start time is six minutes or greater, the watch emits a short beep for

each second of the final 10 seconds before the five-minute point is reached. Four

short beeps are emitted to signal when the five-minute point is reached.

E-29

To configure the countdown timer

1. While the countdown start time is on the display in the

Countdown Timer Mode, hold down A until the current

countdown start time starts to flash, which indicates the

setting screen.

• If the countdown start time is not displayed, use the

procedure under “To use the countdown timer” (page

E-31) to display it.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Progress Beeper Auto-repeat

Hours Minutes

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio Baby-G BLX-560-7ER Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio Baby-G BLX-560-7ER Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio Baby-G BLX-560-7ER Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio Edifice ECB-40PB-1AEF Watch

Manual

Casio Edifice EFV-540DC-1CVUEF Watch

Manual

Casio G-Shock DW-6900TD-4ER Watch

Manual

Casio Edifice EFB-710D-7AVUEF Watch

Manual

Casio G-Shock MTG-B3000B-1AER Watch

Manual

Casio Edifice EQB-2000DB-1AER Watch

Manual

Casio G-Shock DW-5040PG-1ER Watch

Manual

Casio Edifice EFV-C110D-1A3VEF Watch

Related categories