Manual Casio Baby-G BG-169M-1ER Watch

Manual

Operation Guide 3189/3252

E-10

Backlight Precautions

The backlight uses an EL (electro-luminescent) panel that causes the entire display to

glow for easy reading in the dark.

In any mode, press L to illuminate the display for about two seconds.

• The electro-luminescent panel that provides illumination loses power after very long

use.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The watch may emit an audible sound whenever the display is illuminated. This is

due to vibration of the EL panel used for illumination, and does not indicate

malfunction.

• The backlight turns off automatically whenever an alarm sounds.

• Frequent use of the backlight shortens the battery life.

E-11

Data Bank

Mode indicator Name area

Remainin

g

free records Number area

Alternate at

the 1-second

interval.

The Data Bank Mode lets you store up to 25 records, each with a name (up to eight

characters) and a phone number (up to 12 digits). Entering the Data Bank Mode displays

a screen that shows the mode name (DB) and remaining memory capacity (number of

records) for a few moments. After that, the record you were viewing the last time you

exited the Data Bank Mode will appear. Anytime you input a new record, all records will

be sorted automatically into alphabetic sequence on the name.*

* A to Z, 0 to 9, symbols (, or -)

E-12

To input a new Data Bank record

1. In the Data Bank Mode, use D (+) and B (–) to scroll through the Data Bank

records and display the one you want to input data.

2. Hold down A until a cursor appears on the name area.

3. Use D and B to scroll through characters at the current cursor position.

Characters scroll in the sequence shown below.

(Space)

A to Z 0 to 9 . (Period)

-

(Hyphen)

Press .

Press .

• Holding down D or B scrolls at high speed.

E-13

4. When the character you want is at the current cursor position, press C to move the

cursor to the right.

1st digit

8th digit

12th digit

1st digit

Name area

Number area

Press .

5. Repeat the steps 3 and 4 to input the rest of the characters.

• You can input up to eight characters for the name, though only three characters

are visible at a time.

• If the name you input has fewer than eight characters, use C to move the cursor

to the eighth space (which means you would press C three times after inputting

a five-character name).

6. After you input the name, use C to move the cursor to the number area.

• Pressing C while the cursor is located at the eighth character of the name area

advances to the number area. Pressing C while the cursor is located at the 12th

digit of the number area returns to the name area.

E-14

7. Use D and B to scroll through characters (hyphen, numbers, space) at the

current cursor position on the number area. Characters scroll in the sequence

shown below.

(Space)

0 to 9

-

(Hyphen)

Press .

Press .

• Holding down D or B scrolls characters at high speed.

8. When the character you want is at the cursor position, press C to move the cursor

to the right.

9. Repeat steps 7 and 8 to input the rest of the numbers you want.

• You can input up to 12 digits for the number.

E-15

10. After inputting the name and number of the record, press A to store it and exit

the setting screen.

• The display can show only three name characters at a time. Longer names scrolls

continuously from right to left. The symbol “

” indicates that the character to the

left is the last, and the character to the right is the first.

To recall Data Bank records

In the Data Bank Mode, use D (+) and B (–) to scroll through Data Bank records on

the display.

• Holding down B or D scrolls at high speed.

E-16

To edit a Data Bank record

1.

In the

Data Bank

Mode, scroll through the records and display the one you want to edit.

2. Hold down A until the cursor appears in the display.

3. Use C to move the cursor to the character you want to change.

4. Use D and B to change the character.

• See step 3 of “To input a new Data Bank record” for information on inputting name

characters, and step 7 for inputting number characters.

5. After making the changes that you want, press A to store them and exit the setting

screen.

To delete a Data Bank record

1. In the Data Bank Mode, scroll through the records and display the one you want to

delete.

2. Hold down A until the cursor appears in the display.

3. Press B and D at the same time. The message “CLR” appears in the display,

indicating that the record was deleted.

• After the record is deleted, the cursor appears in the name area, ready for input.

4. Input a new record or press A to exit the setting screen.

E-17

World Time

World Time shows the current time in 30 cities (29 time

zones) around the world.

• All of the operations in this section are performed in the

World Time Mode, which you enter by pressing C

(page E-4).

To view the time in another city code

In the World Time Mode, press D to scroll through city

codes (time zones) to the east or B to scroll to the west.

• For full information about city codes, see the “City Code

Table” at the back of this manual.

• If the current time shown for a city is wrong, check your

Timekeeping Mode time and Home City code settings

and make the necessary changes.

Current time in the zone

of the selected city code

City code

Mode indicator

E-18

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use B and D to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

2. Hold down A for about one second to toggle between

Daylight Saving Time (DST indicator displayed) and

Standard Time (DST indicator not displayed).

DST indicator

• The DST indicator will appear on the display whenever you display a city code for

which Daylight Saving Time is turned on.

• Note that the DST/Standard Time setting affects only the currently displayed city

code. Other city codes are not affected.

E-19

Day Counter

The Day Counter Mode lets you count the number of days

from the Timekeeping Mode’s current date to a specific

target date.

This watch has five day counters. You can assign text

titles up to eight characters long to each of the five Day

Counters. Whenever the date specified by any one of the

day counters matches the date of the Timekeeping Mode

(regardless of the day counter’s year setting), the DAYS

indicator flashes on the Timekeeping Mode screen. In the

Day Counter Mode, the DAYS indicator flashes on the

screen of the particular day counter whose date matches

the date of the Timekeeping Mode.

• The day counter on the display when you exit the Day

Counter Mode appears first the next time you enter the

Day Counter Mode.

Year – Month – Day

Target date

Text

DAYS indicator

Numbers of days

Mode indicator

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Casio Baby-G BG-169M-1ER Watch. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Casio. They might be able to provide an original manual. Are you looking for the manual of your Casio Baby-G BG-169M-1ER Watch in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Casio Watches
More manuals of Watches

Frequently Asked Questions about Casio Baby-G BG-169M-1ER Watch

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Casio G-Shock DW-H5600MB-1ER Watch

Manual

Casio G-Shock DW-6900U-1ER Watch

Manual

Casio Collection LWS-2200H-1AVEF Watch

Manual

Casio G-Shock MRG-BF1000R-1ADR Watch

Manual

Casio Collection WS-1400H-1BVEF Watch

Manual

Casio G-Shock GST-B500BD-1A9ER Watch

Manual

Casio G-Shock GA-B2100-2AER Watch

Manual

Casio Collection WS-1700H-5AVEF Watch

Related categories