Home > Household appliances > Kettles > Carlton Kettles > Carlton C17JKB09 Kettle

Manual Carlton C17JKB09 Kettle

Need a manual for your Carlton C17JKB09 Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

GB - 2 GB - 3

GB - 4

Keeping the cable tidy

Extend the mains cable in the kettle

stand to the required length. Locate the

mains cable in one of the slots in the

stand. For safety it is recommended that

the length of exposed mains cable is

kept as short as possible. Place the

kettle stand on a firm level surface and

plug in the mains plug at a standard

mains socket (240 Volt 13 Amp rated).

Caution. This kettle must only be used

with the stand provided.

Before using your kettle for the First Time

Clean your kettle by boiling a full kettle of water twice and then discarding the

water.

Filling the kettle

Slide the switch to open the lid and fill

the kettle with the required amount of

water. Do not exceed the maximum fill

level (Max 1.7L) and not less than the

minimum fill level (Min 0.5L) as indicated

outside the kettle.

Caution. If the kettle is overfilled,

boiling water may be ejected from the

spout and cause scalding.

Switching on

Place the kettle on the stand and press

the power switch to the ON position

(indicated by the symbol ‘I’). The

indicator on the side of the kettle will light

up to indicate that the kettle is heating.

Caution. Never open the lid while the

water is boiling. The steam coming out

from the kettle is very hot.

Caution. If there is insufficient water in

the kettle, the automatic safety cut-out

will operate. If this happens, allow the

kettle to cool for ten minutes before

refilling with cold water and re-boiling.

When the water has boiled

The kettle will automatically switch off

(indicated by the symbol ‘0’ ).

Caution. Ensure that the switch is not

obstructed and the lid is firmly closed.

The kettle will not turn off if the switch is

obstructed or if the lid is open.

Caution. After removing the kettle, there

may be some water on the surface of the

stand. This is condensation from the

steam that causes the kettle to

automatically switch off after boiling. This

is normal and should not be a cause for

alarm.

Cleaning the kettle

The kettle exterior should be cleaned with a soft damp cloth. Do not use

abrasive cleaners or scouring pads which may damage the finish of the kettle.

Never immerse the kettle or kettle stand in water and always keep the electrical

contacts dry. Disconnect from the mains before cleaning the kettle stand.

Caution. Do not insert any foreign objects or allow any liquid to spill into the Power

Connector Hole.

Descaling the kettle

Depending on the hardness of the water

in your area, limescale may be

deposited on the heating element and

the inside of the kettle. This normal

build-up is not harmful to health but an

excessive amount of scale may affect

the performance of the kettle.

To descale, fill the kettle with distilled

water up to three-quarters of the Max

level and bring the water to boil. After

the kettle has switched off, add a

descaling solution following the

manufacturers instructions. Never

attempt to descale the kettle by

chipping or scraping with a sharp

implement.

Power Connector Hole

Cleaning the removable scale filter

To prevent loose particles of limescale being poured into your beverage, your

kettle is fitted with a scale filter. You may remove the filter and fit it back in after

cleaning.

To fit in the filter, open the lid, place the filter inside the bracket at the spout,

locate the 3 slots shown by the arrows above and push it down till it fits in

place.

To remove the filter, open the lid, lift up the filter from the bracket at the spout.

Rating

Let us know what you think about the Carlton C17JKB09 Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Carlton C17JKB09 Kettle?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Carlton C17JKB09 Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Carlton C17JKB09 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Carlton. They might be able to provide an original manual. Are you looking for the manual of your Carlton C17JKB09 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Carlton
Model	C17JKB09
Category	Kettles
File type	PDF
File size	1.58 MB

All manuals for Carlton Kettles
More manuals of Kettles

Frequently Asked Questions about Carlton C17JKB09 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (401) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (265) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (116) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (75) Read more