Contents [ hide
1 Safety Instructions
2 Operation
3 Making Crepes
4 Troubleshooting
5 Technical
Specifications
6 File Downloads
7 References
8 Related Manuals
Safety Instructions
Position on a flat, stable surface.
A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components on this product.
Consult Local and National Standards to comply with the following:
– Health and Safety at Work Legislation
– BS EN Codes of Practice
– Fire Precautions
– IEE Wiring Regulations
– Building Regulations
Caution! Hot surface! Do not touch!
The temperature of the cooking surface may be high when the appliance is operating.
DO NOT immerse the appliance in water.
DO NOT clean with jet/pressure washers.
DO NOT move or carry the appliance when it is switched on.
DO NOT leave the appliance unattended during operation.
Always use oven gloves when cooking or carrying out any adjustments to the appliance.
Do not obstruct any ventilation openings in the appliance body.
During and after cooking, the unit is still hot. Never touch the surface to avoid scalding.
Always switch off and disconnect the power supply to the appliance when not in use.
This appliance must only be used in accordance with these instructions and by persons competent to do so.
Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of local authorities.
Children should be supervised to ensure that they do not play with the appliance.
If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified technician in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Buffalo recommends that this appliance should be periodically tested (at least annually) by a Competent Person. Testing should include, but not be
limited to: Visual Inspection, Polarity Test, Earth Continuity, Insulation Continuity and Functional Testing.
BUFFALO recommends that this product is connected to a circuit protected by an appropriate RCD (Residual Current Device).
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible
performance from your BUFFALO product.
Pack Contents
The following is included:
Buffalo Crepe Maker
Instruction manual
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
Installation
Place the unit on a heat-resistant surface. Avoid placing it on or close to flammable materials. Maintain a distance of 20cm (7 inches) between the
appliance and walls or other objects for ventilation.
Keep the unit away from splashing water and the countertop’s edge.
Note: Before using it for the first time, clean the appliance with warm soapy water. Let dry completely.
Join the conversation about this product
Here you can share what you think about the Buffalo CT931 Crepe Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.