3. Installation Instructions for Built-in
The following instructions are directed at
the qualified installer so that the
installation and maintenance procedures
may be followed in the most professional
and expert manner possible .
Positioning for gas hob
Important: this unit may be installed
and used only in permanently
ventilated rooms
The following requirements must be
observed:
A) the room must be fitted with a
ventilation system which vents smoke and
gases from combustion to the outside. we
suggest to use Brandt family hoods.
In a chimney stack or
branched flue.
(Exclusively for cooking
appliances
Directly to the outside
2. Product Specifications
B) The room must also allow for the
influx of the air needed for proper
combustion. The flow of air for
combustion purpose must not be less
than 2m / h per kw of installed
capacity. The supply of said air can be
effected by means of direct influx from
the outside through a duct with a
inner cross section of at least 100cm
which must not be able to accidentally
blocked.otherwise, the room can be
vented indirectly through adjacent rooms
fitted with ventilation ducts to the outside
as described above, as long as the
adjacent rooms are not shared areas, bed
rooms or present the risk of fire (Fig.B).
C) Intensive and prolonged use of the
appliance may necessitate supplemental
ventilation, e.g. opening a window or
increasing the power of the air intake
system( if present) .
3
2
6. How to keep your cooktop in shape
Before cleaning or performing
maintenance on your appliance,
disconnect it from the electrical power
supply.
To extend the life of the cooktop, it is
absolutely indispensable for it to be
cleaned carefully and thoroughly on a
frequent basis, keeping in mind the
following:
● The enamelled parts must be washed
with warm water without using abrasive
powders or corrosive substances which
could ruin them;
● The removable parts of the burners
should be washed frequently with water
and soap, making sure to remove caked-on
substances.
On cooktops with automatic ignition, the
end of the ignition device must be cleaned
carefully and frequently, gas holes are not
clogged;
● Stainless steel can be stained if it
remains in contact with highly calcareous
water or aggressive detergents(containing
phosphorous)for an extended period of
time. It is recommended that these parts be
rinsed thoroughly with water and then
dried well, it is also a good idea to clean
up any spills.
Clean the cooking surface when it is still
warm with a suitable cleaning product. Then
rub with a damp cloth and dry. Aluminum
foil plastic items, objects made of synthetic
material, sugar or foods with a high sugar
content that have melted onto the surface
must be removed immediately with a
scraper while the cooking surface is still
hot. Do not use abrasive sponges or
cleaning products under any circumstances.
Similar this holds true for chemically
aggressive cleaners like oven sprays and
stain removers (Fig.A)
7. Is there a problem?
It may occur that the cooktop does not
function or does not function properly. Before
calling customer service for assistance, lets
see what can be done. First of all, check to
see that there are no interruptions in the gas
and electrical supplies, and, in particular, that
the gas valves for the mains are open.
The burner does not light or the flame is
not uniform.
Check to make sure that:
● The gas holes on the burner are not
clogged;
● All of the movable parts that make up the
burner are mounted correctly;
● There are no draughts around the cooking
surface.
The flame does not stay lighted on the
model with the safety device.
Check to make sure that:
● You press the knob all the way in;
● All of the movable parts that make up the
burner are mounted correctly;
● The gas holes are not clogged in the area
corresponding to the safety device.
The burner does not remain on when set
to “low”.
Check to make sure that:
● The gas holes are not clogged.
● There are no draughts near the cooking
surface .
The cookware is not stable.
Check to make sure that:
● The bottom of the cookware is perfectly
flat.
● The cookware is centered correctly on
the burner or the electric hot plate.
● The support grids have not been inverted.
Fig.A
8.customer service
In case of malfunction of your appliance,
you may eliminate the problem by following
“Is there a problem”. If it persists, please
contact your dealer or nearest authorized
service department by telephone or mail
indicating the following information:
1.Your name, telephone number and
communication address;
2.The model number and serial number of
your machine;
3.Description of the fault.
Page7Page2
Model no
Model no
Heat input
Heat input
TG1431B
TG1432B
DC1.5V
DC1.5V
TG1483B
DC1.5V
TG1493B
DC1.5V
TG1482B
Gas type
Gas type
300×510mm
800×450mm 800×450mm800×450mm
4.5kw
2.5kw + 1.0kw2.5kw +1.1kw
Rated voltage
Rated voltage
Product size
Product size
TG(1100pa) LPG(2800pa) TG(1100pa) LPG(2800pa)
TG LPG TG LPG TG LPG
4.5kw
9.0kw
9.0KW
10.1KW
10.0KW
10.1KW
10.0KW
Join the conversation about this product
Here you can share what you think about the Brandt TG1493B Hob. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.