Manual Brandt TE202FF1 Hob

Manual

IT GB FR

4

Istruzioni

per l’utente

Installazione

Tutte le operazioni rela-

tive all’installazione (al-

lacciamento elettrico, al-

lacciamento gas, adat-

tamento al tipo di gas,

conseguenti regolazioni,

ecc.) devono essere ese-

guite da personale quali-

ficato secondo le norme

vigenti. Per le istruzioni

specifiche vedi la parte

riservata all’installatore.

Uso

Bruciatori gas (Figg. 1-3).

L'accensione del bruciatore

avviene avvicinando una

fiammella ai fori della parte

superiore dello stesso

premendo e ruotando in

senso antiorario la ma-

nopola corrispondente sino

a farne coincidere l'indice

con la posizione di mas-

simo. Ad accensione av-

venuta regolare la fiamma

secondo la necessità. La

posizione di minimo si

trova al termine delle rota-

zione antioraria. Nei

modelli con accensione

automatica agire sulla ma-

nopola come sopra

descritto, premendo con-

temporaneamente l'ap-

posito pulsante. Nei modelli

con accensione automatica/

simultanea (a una mano) è

sufficiente agire come sopra

descritto sulla sola

manopola corrispondente.

La scarica elettrica fra

candelina e bruciatore dà

luogo all'accensione del

bruciatore interessato. Ad

accensione avvenuta rila-

sciare immediatamente il

pulsante regolando la fiam-

ma secondo necessità.

L’accensione del bruciatore

nei modelli con sicurezza

termoelettrica avviene come

Instructions

for use

Installation

All the operations con-

cerned with the installation

(electrical and gas

connections, adaptation to

type of gas, necessary

adjustments, etc.) must be

carried out by qualified

technicians, in terms with

the standards in force.

For specific instructions,

kindly read the part re-

served for the installation

technician.

Use

Gas burners (Fig. 1-3).

The ignition of the gas

burner is carried out by

putting a small flame to the

upper part holes of the

burner, pressing and

rotating the corresponding

knob in an anti-clockwise

manner, until the maxi-

mum position has coincided

with the marker. When the

gas burner has been turned

on, adjust the flame

according to need. The

minimum position is found

at the end of the anti-

clockwise rotation

direction.

In models with automatic

ignition, operate the knob

as described above, pressing

simultaneously, the cor-

responding push-button.

For models with automatic/

simultaneous (with one

hand) ignition, it is

sufficient to proceed as

described above using the

corresponding knob. The

electric spark between the

ignition plug and the

burner provides the

ignition of the burner itself.

After ignition, immediately

release the push-button and

adjust the flame according

to need.

For models with a

thermoelectric safety

Notice

d’emploi

Installation

Toutes les opérations rela-

tives à l’installation

(branchement électrique,

raccordement gaz,

adaptation au type de gaz,

réglages nécessaires, etc...)

doivent être effectuées par

des spécialistes suivant les

normes en vigueur.

Pour les instructions spéci-

fiques, voir la partie qui

concerne les modalités

d’installation.

Mode d’emploi

Brûleurs à gaz (Fig. 1-3). On

allume le brûleur en ap-

prochant une petite flamme

aux trous de sa partie

supérieure en poussant et

tournant dans le sens

contraire des aiguilles d’une

montre la manette corre-

spondant jusqu’à faire coïn-

cider l’aiguille avec la

position de maximum.

Quand le bruleur est en

marche, règler la flamme

selon la nécéssité. La po-

sition de minimum se

trouve à la fin de la rotation

contraire au sens des aiguil-

les d’une montre.

Pour les modèles à allu-

mage automatique tourner

la manette comme indiquè

ci-dessus, en poussant en

meme temps le bouton

spècial. Pour les modèles à

allumage automatique/

simultané (à une main), il

suffit d’agir sur le bouton

correspondant, comme il est

indiqué ci-dessus. La dé-

charge électrique entre la

petite bougie et le brûleur

allume le brûleur interessé.

Quand le brûleur est

allumé, lâcher la manette, et

regler la flamme selon

nécéssité.

Dans le cas de modèles

doués de sûreté thermo-

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Brandt TE202FF1 Hob. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Brandt. They might be able to provide an original manual. Are you looking for the manual of your Brandt TE202FF1 Hob in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Brandt Hobs
More manuals of Hobs

Frequently Asked Questions about Brandt TE202FF1 Hob

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Brandt TE200XF1 Hob

Manual

Brandt BVE60W Hob

Manual

Brandt BP411XU1 Hob

Manual

Brandt BVE61X Hob

Manual

Brandt IB31 Hob

Manual

Brandt AC350B Hob

Manual

Brandt BV60W Hob

Manual

Brandt TG1782XPB/XLB Hob

Related categories