Home > Household appliances > Kettles > Bosch Kettles > Bosch TWK8631GB Kettle

Manual Bosch TWK8631GB Kettle

Need a manual for your Bosch TWK8631GB Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Congratulations on the purchase of

your new Bosch appliance. You can find

further information about our products

on our website.

Parts and operating

controls

1 Kettle (with water level indicator)

2 Lid

3 Lid release button

4 O ON/OFF switch

5 Temperature indicator (illuminated)

6 + – button (temperature setting)

7 keep warm button

8 Limescale filter (removable)

9 Base

10 Cable tidy

Important: Use the kettle only with its

included base.

■ Only fill the kettle with water. Milk and

instant beverages will burn and damage

the appliance. Never operate the kettle

without water and do not overfill it;

observe the min and max markings. If

the kettle is too full, the water will boil

over!

Before using for the

first time

■ Remove any stickers or film.

■ Unroll the right amount of cable from the

cable tidy and plug it in.

■ Fill the kettle with water. Bring the water

to a boil and discard it. Repeat the

procedure. This will make sure that the

kettle is clean for normal use.

■ When the water comes to a boil for the

first time, add a tablespoon of white

vinegar.

Boiling water

■ Fill the kettle with fresh water through the

spout or the open lid (press lid release

button).

■ Check the amount by reading the water

level indicator markings min and max.

■ Close the lid until it locks and place the

kettle on the base.

■ Press the O ON/OFF switch. The kettle

emits a signal, and the factory-set

temperature (100°C) lights up. The water

is being heated.

■ By pressing button + or – you can set

the temperature to ca. 70°C, ca. 80°C,

ca. 90°C or ca. 100°C.

■ When the water has reached the selected

temperature, the kettle will switch off

automatically, the temperature indicator

goes off, and a signal sounds.

Note: The selected temperature can be

changed at any time while the kettle is

heating up. While the kettle heats up, the

current temperature lights up; the preset

temperature flashes until it has been

reached.

If the temperature cannot be set, this

indicates that the water in the kettle is hotter

than the desired temperature. The current

temperature will light up.

You can turn off the kettle at any time by

pressing the O ON/OFF switch again.

Warning: If you remove the kettle from

the base and replace it before the heating

process is over, the kettle will not continue

to heat the water. The selected settings will

be lost (reset to factory setting).

N.B.: Use the kettle only while the lid is

closed and the limescale filter is in place.

For physical reasons, the base may collect

some condensation water. This is normal; it

does not mean that the kettle leaks.

When you set the temperature to 100°C,

the kettle will turn off only after the water

has reached the boiling point, i.e. it will

bubble for a short period of time.

After boiling, let the kettle cool down for

5 minutes before refilling it with water.

Do not turn on the appliance if the kettle is

empty, otherwise the overheat control will

engage and the appliance will switch itself

off automatically.

Download manual in English (PDF, 1.07 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Bosch TWK8631GB Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Bosch TWK8631GB Kettle?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Bosch TWK8631GB Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Bosch TWK8631GB Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bosch. They might be able to provide an original manual. Are you looking for the manual of your Bosch TWK8631GB Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Bosch
Model	TWK8631GB
Category	Kettles
File type	PDF
File size	1.07 MB

All manuals for Bosch Kettles
More manuals of Kettles

Frequently Asked Questions about Bosch TWK8631GB Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (496) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (331) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (153) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (100) Read more