Home > Do-It-Yourself > Impact Drills > Bort Impact Drills > Bort BHD-14.4 Impact Drill

Manual Bort BHD-14.4 Impact Drill

Need a manual for your Bort BHD-14.4 Impact Drill? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Cordless rotary hammer

INTENDED USE

•

This tool is intended for hammer drilling in concrete, brick

and stone; for drilling in wood, metal and plastic as well as for

screwdriving (speciﬁ c accessories should be used)

•

The hammering system in this tool outperforms any tradi-

tional ratcheting drill when drilling in concrete

•

This tool is designed for use in combination with all standard

SDS+ accessories

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1 On/Off switch

2 Switch for changing direction of rotation

3 Switch for selecting operating mode

4 Locking sleeve

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re and/

or serious injury.

• Ensure the switch is in the off position before inserting

battery pack. Inserting the battery pack into power tools

that have the switch on invites accidents.

• Recharge only with the charger speciﬁ ed by the manufac-

turer. A charger that is suitable for one type of battery pack may

create a risk of ﬁ re when used with another battery pack.

• Use power tools only with speciﬁ cally designated battery

packs. Use of any other battery packs may create a risk of

injury and ﬁ re.

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before you

start working

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the charger (charg-

ers with a rating of 230V or 240V can also be connected

to a 220V supply)

• In case of electrical or mechanical malfunction, immediately

switch off the tool or unplug charger from power source

• SBM Group can assure ﬂ awless functioning of the tool

only when original accessories are used

• Use only accessories with an allowable speed matching

at least the highest no-load speed of the tool

• This tool should not be used by people under the age

of 16 years

• Be careful not to drill or drive into areas where electrical

wires may be contacted

• Ensure that switch (2) is in the middle (locking) position

before making any adjustments or changing accessories

as well as when carrying or storing the tool

• Do not touch the contacts in the charger

• Do not expose tool/charger/battery to rain

• Never charge battery outdoors

• Store tool/charger/battery in locations where tempera-

ture will not exceed 40° C or drop below 0° C

• Batteries will explode in ﬁ re, so do not burn battery for

any reason

• When damaged, and under extreme usage and tem-

perature conditions, batteries may start to leak

- if liquid comes into contact with the skin, wash quickly

with soap and water, then with lemon juice or vinegar

- if liquid gets into the eyes, ﬂ ush eyes with clean water

for a minimum of 10 minutes and seek immediately medi-

cal attention

• When battery is not in tool or charger, it should be kept

away from metal objects such as nails, screws, keys etc. to

prevent short-circuit

• Do not use charger when damaged; take it to one of

the ofﬁ cially registered SBM Group Service Stations for a

safety check

• Do not use battery when damaged; it should be replaced

immediately

• Do not disassemble charger or battery

• Do not attempt to recharge non-rechargeable batteries

with the charger

• Normally when starting to charge the discharged battery,

red and green LEDs of the battery charger are on. When the

battery is fully charged only green LED is on. If no LEDs are

on while the charger is on, do not use the battery and the

charger and take them to the service center.

• When using your tool continuously, the batteries in your

battery pack will become hot. You should let a hot battery

pack cool down for approximately 30 minutes before at-

tempting to recharge.

• In case of long storage, store the battery in fully charged

condition.

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of the charger to the earth terminal of the plug

• If for any reason the old plug is cut off the cord of the charger,

it must be disposed of safely and not left unattended

To ensure longer service life and proper perfor-

mance of the battery, take the following actions

when you start using new battery:

1. Use the new battery, without recharging it, till its com-

plete discharge.

2. Then charge the battery for 3-5 hours.

3. Repeat abovementioned actions (1 and 2) 3-5 times to

reach the nominal battery capacity.

MAINTENANCE

Regularly clean the machine housing with a soft cloth, pref-

erably after each use. Keep the ventilation slots free from

dust and dirt.If the dirt does not come off use a soft cloth

moistened with soapy water. Never use solvents such as

petrol, alcohol, ammonia water, etc. These solvents may

damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please con-

tact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during trans-

port, it is delivered in a sturdy packaging. Most of the pack-

aging materials can be recycled. Take these materials to

the appropriate recycling locations. Take your unwanted

machines to your local SBM Group dealer. Here they will

be disposed of in an environmentally safe way.

Li-Ion batteries can be recycled. Deliver them to a disposal

site for chemical waste so that they can be recycled or dis-

posed of in an environmentally friendly manner.

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Download manual in English (PDF, 1.97 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Bort BHD-14.4 Impact Drill by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Bort BHD-14.4 Impact Drill?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Bort BHD-14.4 Impact Drill. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Bort BHD-14.4 Impact Drill. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bort. They might be able to provide an original manual. Are you looking for the manual of your Bort BHD-14.4 Impact Drill in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Bort
Model	BHD-14.4
Category	Impact Drills
File type	PDF
File size	1.97 MB

All manuals for Bort Impact Drills
More manuals of Impact Drills

Frequently Asked Questions about Bort BHD-14.4 Impact Drill

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the difference between an impact drill and a rotary hammer? Verified

Impact drills can be used for drilling holes in bricks and mortar walls. For drilling holes in concrete walls you need a rotary hammer.

This was helpful (134) Read more

Do I need to wear hearing protection when using a drill? Verified

Yes you should. Although the amount of noise produced by a drill can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (24) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (9) Read more