Home > Miscellaneous > Drones > Blade Drones > Blade 350 QX BNF Drone

Manual Blade 350 QX BNF Drone

Need a manual for your Blade 350 QX BNF Drone? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

The Battery Charging Process

1. Charge only batteries that are cool to the touch and are not damaged. Look at the

battery to make sure it is not damaged e.g., swollen, bent, broken or punctured.

2. Attach the input cord of the charger to the appropriate power supply (12V acces-

sory outlet).

3. When the Li-Po charger has been correctly powered up, there will be an approxi-

mate 3-second delay, then an audible “beep” and the green (ready) LED will ﬂ ash.

4. Turn the control on the Amps selector so the arrow points to the charging rate

required for the battery (the 2200mAh Li-Po battery will charge at 2.0 amps). DO

NOT change the charge rate once the battery begins charging.

5. Move the cell selector switch to 3-cell for your battery.

6. Connect the balancing lead of the battery to the 3-cell (4 pin) charger port and

press the Start button to begin battery charging.

7. The green and red LEDs may ﬂ ash during the charging process when the charger

is balancing cells. Balancing prolongs the life of the battery.

8. When the battery is fully charged, a beep will sound for about 3 seconds and the

green LED will shine continuously.

Attempting to charge an over-discharged battery will cause the charger to repeat-

edly ﬂ ash and beep, indicating an error has occurred.

9. Always unplug the battery from the charger immediately upon completion of

charging.

Charging the Flight Battery

E-ﬂ ite

2-3S LiPo Balancing Charger Speciﬁ cations

• Input power: 10.5–15.0V DC, 3-amp

• Charges 2- to 3-cell Li-Po packs with minimum

capacity of 500mAh

E-ﬂ ite 3S 11.1V 2200mAh Li-Po Battery Pack

The E-ﬂ ite

3S Li-Po battery pack features a balancing

lead that allows you to safely charge your battery pack

when used with the included E-ﬂ ite Li-Po balancing

charger.

CAUTION: The balance connector must be

inserted into the correct port of your charger

prior to charging.

CAUTION: Overcharg-

ing a battery can cause

a ﬁ re.

CAUTION: Only use a

charger speciﬁ cally

designed to charge a Li-Po bat-

tery. Failure to do so could result

in ﬁ re causing injury or property

damage.

CAUTION: Never exceed

the recommended

charge rate.

NOTICE: If using a battery other

than the included Li-Po battery,

refer to your battery manufac-

turer’s instructions for charging.

Box Contents

• Blade 350 QX

• Camera mount

• 3S 11.1V 2200mAh

Li-Po Battery Pack

• 2-3S DC Li-Po Balancing

Charger

• DX5e DSMX 5-Channel

Transmitter (RTF only)

• 4 AA Batteries (RTF only)

Rating

Let us know what you think about the Blade 350 QX BNF Drone by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Blade 350 QX BNF Drone?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Blade 350 QX BNF Drone. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Blade 350 QX BNF Drone. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Blade. They might be able to provide an original manual. Are you looking for the manual of your Blade 350 QX BNF Drone in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.