Manual Black and Decker FSMH16151 Steam Cleaner

Manual

6

ENGLISH

(Original instructions)

Note: Ensure the ller cap is rmly secured.

Note: Do not use chemical cleaners with your steam mop..

Attaching the carpet glider (Fig. G) (For use on

carpets only)

u Place carpet glider on the oor.

u Attach a cleaning pad to the unit.

u Lightly press the steam mop down onto the carpet glider

(14) until it clicks into place.

Caution! Always place your steam mop with the handle (10)

in the upright position when stationary and make sure the

steam mop is turned off when not in use.

Removing the carpet glider (Fig. G)

Caution! Always wear suitable shoes when changing the

carpet glider on your steam mop. Do not wear slippers or

open toed footwear.

u Return the handle (10) to the upright position and turn the

steam mop ‘OFF’.

u Wait until the steam mop cools down. (approximately ve

minutes)

u Place the front of your shoe onto the carpet glider removal

tab (22) and press down rmly.

u Lift the steam mop up off the carpet glider (14).

Caution! Always place your steam mop with the handle (10)

in the upright position when stationary and make sure the

steam mop is turned off when not in use.

Fitting a scent pack (Fig. I & J)

Warning! Return the handle (10) to the upright position and

turn the steam mop ‘OFF’. Wait until the steam mop cools

down. (approximately ve minutes).

u Slide the door release button (26), the door will open.

u Place the scent pack into the cavity (27).

u Close the door (28) py pushing it rmly down.

Attaching the hose and accessories to the Hand

held steam cleaner (Fig. K & L)

Warning! Inspect the seal (26) on the steam nozzle (4) and

hose (27) before each use. If the seal is missing or damaged

then please contact your nearest authorised repair agent. Do

not use the appliance.

Attaching the hose (Fig. K)

u Press in the clips (28) on either side of the hose (27).

u Press the hose (27) onto the steam nozzle (4) and release

the clips (28).

Important! Ensure that the hose (27) is securely fastened

before using the hand held steam cleaner. If steam escapes

from the joint then the hose is not correctly t, allow the unit to

cool then remove and re-t the hose.

Attaching the variable steam jet nozzle (Fig. L)

u Press in the clips (30) on either side of the variable steam

jet nozzle (31).

u Press the variable steam jet nozzle onto the steam nozzle

(4) or the hose (27) and release the clips (30).

Important! Ensure that the variable steam jet nozzle (31) is

securely fastened before using the hand held steam cleaner.

If steam escapes from the joint then the variable steam jet

nozzle is not correctly t, allow the unit to cool then remove

and re-t the variable steam jet nozzle.

Attaching other accessories (Fig. J)

u Align the lugs on the hose with the recesses on the acces-

sory.

u Press the accessory (29) onto the hose (27) and twist

anti-clockwise until the accessory clicks into place.

Note! The variable steam jet nozzle may be used without the

hose by tting them directly to steam nozzle. All other acces-

sories must be connected to the hose for use.

Removing the hose and accessories(Fig. K & L)

Warning! The Steam nozzle, variable steam jet nozzle, hose

and accessories become hot during use. Allow the unit and all

accessories to cool before removing any accessories.

Removing an accessory (Fig. K)

u Twist the accessory (29) clockwise then pull away from

the hose (27).

Removing the hose (Fig. K)

u Press in the clips (29) on either side of the hose (27) and

pull away from the steam nozzle (4).

Removing the variable steam jet nozzle (Fig. L)

u Press in the clips (30) on either side of the variable steam

jet nozzle (31) and pull away from the steam nozzle (4).

Use

Important! This unit will kill 99.9% of bacteria & germs when

used in accordance with this manual and with the micro bre

pad tted and a continuous run time of 90 seconds.

Switching on and off (Steam mop)

u To switch the appliance on, press the ON/OFF button (1).

It takes approximately 15 seconds for the steam mop to

heat up.

Note: When the steam mop is rst turned on the water res-

ervoir will glow red. Once the steam mop is ready to use the

water reservoir will glow blue.

u To switch the appliance off, press the ON/OFF button (1).

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Black and Decker FSMH16151 Steam Cleaner. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Black and Decker. They might be able to provide an original manual. Are you looking for the manual of your Black and Decker FSMH16151 Steam Cleaner in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Black and Decker Steam Cleaners
More manuals of Steam Cleaners

Frequently Asked Questions about Black and Decker FSMH16151 Steam Cleaner

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Black and Decker BHSM1615DSM Steam Cleaner

Manual

Black and Decker FSM1640 Steam Cleaner

Manual

Black and Decker FSM1500 Steam Cleaner

Manual

Black and Decker BDS1616R Steam Cleaner

Manual

Black and Decker BHSM169DSM Steam Cleaner

Manual

Black and Decker FSMH13E10 Steam Cleaner

Manual

Black and Decker FSMH13E5 Steam Cleaner

Manual

Black and Decker FSM1630 Steam Cleaner

Related categories