Manual Black and Decker BEHT201 Hedgecutter

Manual

7

ENGLISH

(Original instructions)

Warning! Do not use trimmer for cutting stems greater than

16 mm. Use the trimmer only for cutting normal shrubbery

found around houses and buildings.

Level hedges (g.H)

u To obtain exceptionally level hedges, a piece of string can

be stretched along the length of the hedge as a guide.

Side trimming hedges (g.I)

u Begin at the bottom and sweep up.

The cutting blades are made from high quality, hardened steel

and with normal usage, they will not require resharpening.

However, if you accidentally hit a wire fence (Fig. J), stones,

glass or other hard objects, you may put a nick in the blade.

There is no need to remove this nick as long as it does not in-

terfere with the movement of the blade. If it does interfere, un-

plug the cord and use a ne toothed le or sharpening stone

to remove the nick. If you drop the trimmer, carefully inspect it

for damage. If the blade is bent, housing cracked, or handles

broken or if you see any other condition that may affect the

trimmer’s operation contact your local BLACK+DECKER

Service Center for repairs before putting it back into use.

Fertilizers and other garden chemicals contain agents which

greatly accelerate the corrosion of metals. Do not store the

unit on or adjacent to fertilizers or chemicals.

Accessories

The performance of your tool depends on the accessory used.

BLACK+DECKER accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

Maintenance

Your BLACK+DECKER corded/cordless appliance/tool has

been designed to operate over a long period of time with a

minimum of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubrication oil is available from your BLACK+DECKER dealer

(cat. no. A6102-XJ).

Warning! Before performing any maintenance on corded/

cordless power tools:

u Switch off and unplug the appliance/tool.

u Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.

u Or run the battery down completely if it is integral and then

switch off.

u Unplug the charger before cleaning it. Your charger does

not require any maintenance apart from regular cleaning.

u Regularly clean the ventilation slots in your appliance/tool/

charger using a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth. Do

not use any abrasive or solvent-based cleaner.

u After use, carefully clean the blades. After cleaning, apply

a lm of light machine oil to prevent the blades from rust-

ing.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new

plug.

u Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the tting instructions supplied with good quality plugs.

Recommended fuse: 5 A.

Protecting the environment

Separate collection. Products and batteries

marked with this symbol must not be disposed of

with normal household waste.

Products and batteries contain materials that can be

recovered or recycled reducing the demand for raw materials.

Please recycle electrical products and batteries according to

local provisions. Further information is available at

www.2helpU.com

Technical data

BEHT201 Type 1 BEHT251 Type 1

Voltage V

AC

230 230

Power input W

420 450

Blade strokes

(no load)

min

-1

1960 1815

Blade length

cm

45 50

Blade gap

mm 16 18

Blade brake time s

<1 <1

Weight

kg 1.91 2.16

Level of sound pressure according to EN 60745:

Sound pressure level at operator position (L

pA

) 85 dB(A), uncertainty (K) 3 dB(A)

Sound power level (L

WA

) 97 dB(A), uncertainty (K) 2.5 dB(A)

Vibration total values (triax vector sum) according to EN 60745:

Vibration emission value (a

h, D

) 2.5 m/s

2

, uncertainty (K) 1.5 m/s

2

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Black and Decker BEHT201 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Black and Decker. They might be able to provide an original manual. Are you looking for the manual of your Black and Decker BEHT201 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Black and Decker Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about Black and Decker BEHT201 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Black and Decker GL605 Hedgecutter

Manual

Black and Decker GT223 Hedgecutter

Manual

Black and Decker GTC5455PC Hedgecutter

Manual

Black and Decker GT515 Hedgecutter

Manual

Black and Decker GTC1843L Hedgecutter

Manual

Black and Decker GT251 Hedgecutter

Manual

Black and Decker GSL300-QW Hedgecutter

Manual

Black and Decker GTC2451 Hedgecutter

Related categories