Manual Bertazzoni PM361IGX Hob

Manual

5

GAS CONNECTION

Before connecting the appliance to the gas supply, first remove the plastic plug on which is press-

fitted into the gas inlet union; to remove, just pull it off.

IMPORTANT INFORMATION CONCERNING THE INSTALLATION OF THE APPLIANCE

The hob can be installed by itself, in an isolated position or inserted between two kitchen units or

between one kitchen unit and a wall. Furthermore the back wall and surrounding surfaces must

resist a temperature of 65 K.

To prevent the plastic layer which covers the kitchen unit from ungluing, the glue used to join the

two surfaces together must resist temperatures of up to 150 °C

The installation of the appliance must be carried out according to the norms in force of the country

concerned and the appliance must be installed in a well ventilated place.

This appliance is not equipped with devices to remove the products of combustion. The appliance

must therefore be connected following the norms for installation mentioned above. Special attention

must be paid to the information below regarding aeration and ventilation of the premises.

VENTILATION OF THE PREMISES

To guarantee that the appliance works correctly it is necessary that the place where the appliance is installed

is continuously ventilated. The volume of the premises must not be less than 25 m³ and the quantity of air

needed must be based on the regular combustion of gas and on the ventilation of the premises. The natural

flow of air will take place through permanent openings made in the wall of the premises to be ventilated:

these openings will be connected to the outside and must have a minimum section of 100 cm² ( see Fig. 2 ).

These openings must be made in such a way that they cannot be obstructed.

POSITION AND VENTILATION

The cooking appliances that use gas must always remove the products of combustion via a hood linked to

chimneys, chimney flues or via a direct connection to the outside ( see Fig. 3 ). If it is not possible to fit a

hood it is possible to use a fan, fitted on the window or facing directly outside, which operates when the

appliance is in use. ( see Fig. 4 ). In this way the norms in force of the country concerned regarding the

ventilation of premises are strictly followed.

CONNECTING THE APPLIANCE TO THE GAS SUPPLY

Before connecting the appliance to the gas supply you first need to remove the plastic protective plug for the

gas supply which is inserted under pressure in the gas inlet connection. To remove the plug simply unscrew

it.

Then make sure that the details shown on the label on the lower part of the case are compatible with

those of the gas supply.

A label on the last page of this manual and on the lower part of the case indicates the conditions for

regulating the appliance: type of gas and pressure used.

IMPORTANT: This appliance must be installed in accordance with the norms in force of the country

concerned and it must only be used in a well-ventilated place.

ATTENTION: Remember that the gas inlet connection for the appliance is threaded 1/2 gas

cylindrical male in accordance with the norms UNI-ISO 228-1. (Fig. 10)

ELECTRICAL CONNECTION

The appliance is equipped with a 1.2 m. flexible metal cable with 3 wires ready for connection to a dedicated

4 wire grounded power supply/junction box: (fig.8)

Voltage 240 V a.c., Frequency 50Hz. Max Current: 4500W /22,2 A

brown wire: connect to L1 (hot)

---------------: connect to L1 (hot)

blu wire: connect to N (neutral)

Yellow/Green wire: connect to GND (ground)

A dedicated line and junction box should be used to connect the oven to a 25 A circuit.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Bertazzoni PM361IGX Hob. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bertazzoni. They might be able to provide an original manual. Are you looking for the manual of your Bertazzoni PM361IGX Hob in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Bertazzoni Hobs
More manuals of Hobs

Frequently Asked Questions about Bertazzoni PM361IGX Hob

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Bertazzoni P604IC2B2NEE Hob

Manual

Bertazzoni P903BMODX Hob

Manual

Bertazzoni P905LMODGNE Hob

Manual

Bertazzoni P782BMODGNE Hob

Manual

Bertazzoni PM3630GX Hob

Manual

Bertazzoni CB36500X Hob

Manual

Bertazzoni P604LPRONE Hob

Manual

Bertazzoni P604I2M28NV Hob

Related categories