Home > Kitchenware > Ice Cube Makers > Bartscher Ice Cube Makers > Bartscher C26 Ice Cube Maker

Manual Bartscher C26 Ice Cube Maker

Need a manual for your Bartscher C26 Ice Cube Maker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Installation and operation

104049 13 / 22

• The appliance should be installed only in rooms, in which ambient temperature

falls in the range of 10–32°C.

Water Connection

1. Install the appliance near a water connection.

ATTENTION!

Connect the appliance only to a supply connection of potable water.

Otherwise install a water purification appliance.

2. Connect water supply tube to a tap.

3. Connect the other end of the tube to the water connection at the back of the

appliance.

4. Insert gasket rings.

NOTE!

The hydraulic pressure should amount to 2–3 bar. With higher pressure

install a pressure reducer.

Water Drain

1. Connect one end of the drain tube with a rubber sleeve to drain connection at

the back of the appliance.

2. Fit the other end of the drain hose to a sewerage pipe or a water container.

3. Make sure the sewerage pipe or a water container are below the level of ice-

cube maker's drain port, so that water could flow easily.

Power supply connection

• Verify if technical data of the appliance (see rating plate) correspond with the

local electric power grid specification.

• Connect the appliance to a single, properly grounded mains socket with

protective contact. Do not connect the appliance to a multi-socket.

• The power cord should be laid in a way preventing anyone from threading on it

or tripping against it.

• If in winter the ice-cube maker is brought from the outside to a room, leave it for

a few hours to heat up and reach the room temperature before switching it on.

• Before connecting the appliance to the power supply, wait 1 hour for the coolant

to stabilize.

• After a power failure or when the plug is removed from the socket, reconnect the

appliance to the power supply after 5 minutes at the earliest.

Rating

Let us know what you think about the Bartscher C26 Ice Cube Maker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Bartscher C26 Ice Cube Maker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Bartscher C26 Ice Cube Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Bartscher C26 Ice Cube Maker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Bartscher. They might be able to provide an original manual. Are you looking for the manual of your Bartscher C26 Ice Cube Maker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.