Manual Barska AX13262 Safe

Manual

LOW BATTERY WARNING

After entering correct personal code and the green and

red indicator lights are flashing this indicates that the

batteries are low. Follow steps in “BATTERIES”

NOTE

Safe may still be opened in low battery state depending

on battery voltage. If safe cannot be opened please use

emergency key. All registered pin codes remain stored

MOUNTING INSTRUCTIONS

The safe may be mounted to a wall. Be aware of the

load bearing. Failure to do so can result in personal

injury and/or damage to property. Use appropriate

tools when performing work and always use eye

protection.

- Do not mount the safe without anchoring to the wall.

- Find the studs in the wall, at your desired location.

Most studs are 16 inches or 24 inches apart.

- Check the wall for concealed wires or pipes.

- Measure the location of the pre-set drill holes; mark

their exact position onto the wall ensuring that the

studs or anything else behind will not interfere.

- Drill the appropriate size holes for the anchors you

are using.

- Carefully press the anchor into the holes at this time.

- Mount the safe by running screws from inside of the

safe and securing to anchors; ensure the safe is

mounted securely.

CARE AND MAINTENANCE

- Keep liquids away from the control panel. Spills on the

control panel will cause damage and possibly

electric shock.

- Secure safe in a proper area to prevent from falling

and causing damage or injury.

- DO NOT disassemble the product. For all repairs,

contact BARSKA Customer Service.

- DO NOT use chemicals or cleaning agents to clean

the safe.

- DO NOT over stuff the contents of the safe, it can

damage the motor mechanism or the contents

- DO NOT place emergency keys inside of safe

6/19

1 YEAR LIMITED WARRANTY

SAFE

BARSKA warrants this new safe to be free of original defects

in material and/or workmanship under normal use for a

period of twelve (12) months from the date product is

received by purchaser. This warranty does not include

damage caused by improper installation or maintenance.

Damage from misuse, abuse, accident (such as dropping),

normal wear and tear, fire, flood, or acts of nature. Damage

from service or repairs other than those performed by

BARSKA. Labor, cost and shipping charges for the removal

and replacement of defective parts beyond the initial

twelve-month warranty period. All transportation and shipping

charges. Removing or altering the seal under any

circumstances will automatically void the warranty.

This warranty is limited to original purchaser and is not

transferable. This warranty applies only to products

purchased in the United States.

Please email [email protected] or call 1.888.666.6769 for

Return Merchandise Number (RMA#) before any returns. The

RMA number must appear on the outside of the shipping

package. Product must be packed carefully and sturdily in its

original packaging to prevent damage in transit and returned

freight pre-paid to:

BARSKA OPTICS

Repair Department

855 Towne Center Drive

Pomona, CA 91767

Please include all of the following when returning BARSKA

products for service and/or replacement:

1. Please write your complete details (Name, Address,

Telephone #, E-mail address, RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect.

4. A Check/Money Order to cover inspection, shipping and

handling. Charges are as follows

$70 - Large

$40 - Standard

BARSKA will examine and test returned product and repair or

replace defective part(s) or units with new part(s) or a new

unit if necessary within the warranty period. Purchaser is

required to remit amount above to BARSKA for return shipping

and handling at time product is returned. If repair is required

after warranty period expiration, purchaser will be

charged for replacement parts and return shipping.

BARSKA® Optics shall not be liable for any consequential,

incidental and/or contingent damages whatsoever. We will

not pay shipping, insurance or transportation charges from

you to us, or any import fees, duties and or taxes. This

warranty supersedes all previous BARSKA® Optics

warranties.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Barska AX13262 Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Barska. They might be able to provide an original manual. Are you looking for the manual of your Barska AX13262 Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Barska Safes
More manuals of Safes

Frequently Asked Questions about Barska AX13262 Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.