Home > Business equipment > Safes > Barska Safes > Barska AX13262 Safe

Manual Barska AX13262 Safe

Need a manual for your Barska AX13262 Safe? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

User Manual for Key Safe

WARNING

Read all instructions before using this safe.

-Test registered pin code a few times before closing

the safe door.

- Avoid leaving door open and unattended; it will allow

unauthorized individuals to reprogram the safe,

gaining full access to the safe and its contents.

- Store emergency keys in a secure place; NOT inside

of the safe.

- To maximize security and performance of the safe,

test pin code every 6 months.

- Test and make sure the safe works properly before

mounting. Once tested, mount the safe before use.

GETTING STARTED

Remove emergency keys and other included

accessories from packaging.

KEY ACCESS

1. To expose the key access, gently lift off the key cover

2. Use emergency key and insert into key hole, turn key

counter clockwise and turn handle clockwise.

BATTERY

Battery compartment is located on the inside of the door

safe.

1. Remove battery compartment cover.

2. Insert four new AA alkaline batteries into the battery

compartment and restore battery compartment cover.

Note: Do not mix new and old batteries

PIN CODE REGISTRATION

Safe retains only two 3-8 digit pin codes

1st Personal Pin Code

1. With safe open, press and release the initialization

button located on the inside of the safe door. Yellow

indicator light will be on.

2. On the key pad input your 3-8 digit pin code and

press and release either "A" or "B" to confirm. Yellow

indicator light will turn off.

2nd Personal Pin Code

1. On the keypad press “00” then press and release the

initialization button located inside of the safe door.

Yellow indicator light will be on.

2. On the key pad input your 3-8 digit pin code and

press and release either "A" or "B" to confirm. Yellow

indicator light will turn off.

TESTING REGISTERED PIN CODES

1. With safe door open, and the handle/lock knob in the

lock position. Enter in 1st personal pin code on the

key pad and press and release either "A" or "B"

to confirm.

Successful Save

- You will hear 2 short beeps

- The green indicator light will flash

- Move handle to the right to retract bolts

Unsuccessful Save

- You will hear 3 short beeps

- Handle will not move and bolts will stay extended

- Repeat steps CREATING PERSONAL PIN CODES

2. To test 2nd personal pin code, enter in 2nd personal

pin code on the key pad and press and release

either "A" or "B" to confirm. See “Successful Save”

and “Unsuccessful Save” above

3. Test a pin code that is not registered to make sure

the safe does not open to complete testing process

OPENING & CLOSING SAFE WITH PERSONAL PIN

CODES

OPEN:

1. On the key pad enter in either of your 3-8 digit pin

codes and press and release either "A" or "B"

to confirm.

2. Turn the handle/lock knob to the unlock position and

pull the safe door open

NOTE

After entering pin, you have 5 seconds to turn the knob

before the mechanism re-locks automatically

CLOSE:

To close safe, close door and turn knob to the lock

position

LOCK OUT

When the wrong pin code is entered 3 consecutive

times lock out mode will activate for 5 min; safe cannot

be used during this time; please wait or open with

emergency keys.

CHANGING PERSONAL PIN CODES

Follow steps in “PIN CODE REGISTRATION”

See reverse side for more information

855 Towne Center Drive | Pomona, CA 91767

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

A. Handle

B. Key Access

C. Indicator Lights

D. Key Pad

E. Key Drop Slot

- Located on the side of the safe

DCBA

1 2 3

4 5 6

7 8 9

6/19

BC610

Rating

Let us know what you think about the Barska AX13262 Safe by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Barska AX13262 Safe?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Barska AX13262 Safe. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Barska AX13262 Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Barska. They might be able to provide an original manual. Are you looking for the manual of your Barska AX13262 Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Barska
Model	AX13262
Category	Safes
File type	PDF
File size	0.27 MB

All manuals for Barska Safes
More manuals of Safes

Frequently Asked Questions about Barska AX13262 Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The lock on my electronic safe won't open, but I am sure the code I enter is correct. What can I do? Verified

This can happen when the batteru voltage is too low. This can be caused by cheap or nearly empty batteries. Replace the batteries and try again. If this does not solve the problem you should contact the manufacturer.

This was helpful (1309) Read more

I lost the combination of my safe, what can I do? Verified

In the case of a safe with an electronic lock, there is often an included emergency key with which the safe can still be opened. If no emergency key or other solution is available, there are specialized companies that can help. However, in the case of a small safe, the cost of a specialist may be higher than that of a new safe. In that case, the last option is to break open the safe.

This was helpful (610) Read more

When is it a good idea to secure my safe? Verified

In general it's a good idea to secure safes of 1000 kilogram or less. This prevents a thief to steal the entire safe. It's also possible that an insurance company demands a safe to be secured. Always have your safe secured by a specialist.

This was helpful (178) Read more