Manual Barska AX12760 Safe

Manual

Getting Started

1. Remove safe from packaging and remove Manual and

all accessories that came with the safe.

2. Insert emergency key into key access and turn

clockwise; move handle to unlock position and open

the safe. Remove key and keep in a secure location.

3. Open battery compartment and insert 4 AA

batteries. Do not mix old and new batteries.

4. Press “0” on keypad to wake up the safe and place

any finger on scanner. Few beeps will be heard and

red flashes will be seen then safe will unlock, turn

handle to unlocked position to open the door.

Note: Safe is in Factory Default Mode: ANY Fingerprint

can open the safe.

Fingerprint Registration

1. With safe open press and release initialization button

located inside the safe and place desired finger on

fingerprint scanner.

Successful Registration

2 beeps will be heard and 2 green flashes will be seen.

Unsuccessful Registration

2 quick beeps will be heard along with red flash.

See reverse side for more information

6/19

BC611

WARNING

Test Registered Fingerprint

1. With Safe door open, turn handle to lock position

extending the bolts out.

2. Press “0” to wake up safe and place Registered

Fingerprint on the scanner. If green light is seen when

safe can be unlocked then registration was successful.

If safe opens but several beeps and red flash is seen

then registration was unsuccessful. Follow steps under

Fingerprint Registration to register your

desired fingerprint.

Pin Code Registration

1. Enter Current Pin Code (Default Pin Code:

“12312312312”); Green lights will be seen, then press

the “3” on keypad.

2. Enter new desired Pin Code between 4 – 11 digits and

if Pin Code is between 4 – 10 digits, press initialization

button on the back of the safe to finish. 1 long beep

will be heard and green light will be seen.

Note: Pin Code CANNOT start with “0”

Test Registered Pin Code

1. With Safe door open, turn handle to lock position

extending the bolts out.

2. Enter Registered Pin Code, If safe unlocks then

registration was successful. If safe does not unlock

then registration was unsuccessful, please follow steps

under Pin Code Registration to register your pin code.

Close / Open Safe Door

Open Safe Door with Fingerprint

Press “0” on keypad to wake up the safe and place

registered finger on scanner. Turn handle to unlocked

position and open safe door.

Open Safe Door with Pin Code

Enter Registered Pin Code and turn handle to unlocked

position to open safe door.

Closing Safe Door

Close door and turn handle to lock position to lock

the safe.

Manual for Biometric Keypad Safe

Read all instructions before using this safe

H

F

G

I

E

A

B

©2019 BARSKA®

855 Towne Center Drive | Pomona, CA 91767

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

A. Initialization Button

B. Battery Compartment

C. Bolts

D. Handle

E. Emergency Key Access

F. Fingerprint Scanner

G. Indicator Lights

H. Key Pad

I. External Battery Source

* Actual model may vary

C

D

Lock

Unlock

- Safe can be opened by either Fingerprint, PIN code,

and/or Emergency Keys.

- If user resets the safe to Factory Default mode: ANY

fingerprint and Factory Default PIN code can open

the safe.

- Register BOTH Fingerprint and PIN code to disable

factory default mode.

- Register at least two different fingerprints and test a few

times before closing the safe door.

- To improve fingerprint accuracy, please register the same

finger 5 different times; please remove finger after each

successful registration

- Test with a non-registered fingerprint. If the safe opens,

the safe is still in Factory Default mode.

- Avoid leaving safe door open and unattended; it will allow

unauthorized individuals to add their fingerprints and/or

reprogram the safe, gaining full access to the safe and

the contents.

- Test the Emergency Keys and store them in a secure

place, NOT inside of the safe.

- To maximize the security and performance of the safe,

test registered fingerprints every 6 months.

- Test and make sure the safe works properly

before mounting.

- Mount the safe before use, the safe may tip forward if not

properly mounted.

- Keep children away from safe; they should not play

with or around the safe at anytime. Children at play

could accidentally get locked inside the safe or

accidentally pull on the safe door causing safe to tip

over if not properly mounted.

- Failure to follow these warnings could result in serious

injury or death.

9V

Battery Not

Included

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Barska AX12760 Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Barska. They might be able to provide an original manual. Are you looking for the manual of your Barska AX12760 Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Barska Safes
More manuals of Safes

Frequently Asked Questions about Barska AX12760 Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.