Manual Barska AX11224 Safe

Manual

User’s Manual for Biometric Safe

A. Initialization Button

B. Battery Compartment

C. Bolts

D. Fingerprint Scanner

E. Indicator Lights

F

G

A

B

D

E

H

* Actual model may vary

See reverse side for more information

9/12

BC248

1. INSTALL BATTERIES

1. Remove Battery Compartment (B) cover

2. Insert 4 AA batteries and restore battery cover

3. Bolts (C) automatically extend when batteries are inserted

To retract bolts:

- Press and release Wake-Up Button (F)

- Place any finger on the Fingerprint Scanner (D)

- Bolts will retract

2. FINGERPRINT REGISTRATION

IMPORTANT:

The safe is in Factory Default mode, ANY fingerprint can

open the safe. Only successful registered fingerprint can

terminate Factory Default mode

During registration the door must remain open and the Bolts (C)

must be in the retracted position. Otherwise, the fingerprint will

not be saved

To retract bolts:

- Press and release Wake-Up Button (F)

- Place any finger on Fingerprint Scanner (D)

- Bolts will retract

1. Press and release Initialization Button (A)

2. Immediately place a finger on the Fingerprint Scanner (D)

- Hold finger still

- 1 beep will be heard recognizing the fingerprint; followed by

2 consecutive beeps

- Remove finger

- Registration is complete

Successful Registration

Registration is successful when a total of 3 beeps are heard

Unsuccessful Registration

2 short beeps will be heard; repeat registration process again

3. To register another fingerprint – repeat steps 1 - 2

3. TEST A REGISTERED FINGERPRINT

1. With safe door open, press and release Wake-Up Button (F)

- Bolts (C) will extend

2. Press and release Wake-Up Button (F)

- Place a non-registered finger on the Fingerprint Scanner (D)

- Bolts will stay extended

3. If the bolts retract with a non-registered fingerprint,

registration was unsuccessful; and safe remains in Factory

Default mode

- Repeat steps under FINGERPRINT REGISTRATION

4. Press and release Wake-Up Button (F)

- Place a registered finger on the Fingerprint Scanner (D)

- Bolts will retract

4. CLOSE/OPEN SAFE DOOR

CLOSE: Close door, press and release Wake-Up Button (F)

- Bolts will extend

OPEN: Press and release Wake-Up Button (F)

- Place a registered finger on Fingerprint Scanner (D)

- Bolts will retract

5. BEEP SOUND OPTIONS

Beep OFF: Press and HOLD the Initialization Button (A) until

the Indicator Lights (E) are flashing green – RELEASE the

Initialization Button

Beep ON: Press and HOLD the Initialization Button (A) until

the Indicator Lights (E) are flashing green followed by 1 beep

– RELEASE the Initialization Button

6. DOOR OPEN ALARM

Regardless of the beep sound option chosen (either On or Off)

the door alarm is fixed to beep

The alarm is activated when the safe door is open and Bolts

(C) are retracted

Within 5 seconds, the Indicator Lights (E) will start to

flash green

More than 5 minutes, the safe will start beeping every

10-20 seconds

Close safe door, press and release Wake-Up Button (F) to

extend the Bolts (C) to cease the alarm

With the safe door open and the Bolts (C) extended, no lights

or beeping will be heard

7. OPEN SAFE WITH EMERGENCY KEY

1. To expose the Emergency Key access, remove Logo

Plate (G) screws with provided Allen wrench

2. Insert Emergency Key into key access, and turn clockwise

to open

NOTE: Store Emergency Keys in a secure place, NOT inside

of the safe

C

F. Wake-Up Button

G. Logo Plate and Emergency

Key Access

H. External Battery Access

(optional)

WARNING

- New Safe is in Factory Default mode, ANY fingerprint

can open the safe. Only successful registered

fingerprint can terminate Factory Default mode.

- Register at least two different fingerprints and test a

few times before closing the safe door.

- Test with a non-registered fingerprint. If the safe

opens, the safe remains in Factory Default mode.

- Avoid leaving safe door open and unattended; it will

allow unauthorized individuals to add their fingerprints

and/or reprogram the safe, gaining full access to the

safe and the contents.

- Test the Emergency Keys and store them in a secure

place, NOT inside of the safe.

- To maximize the security and performance of the

safe, test registered fingerprints every 6 months.

Read all instructions before using this safe.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Barska AX11224 Safe. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Barska. They might be able to provide an original manual. Are you looking for the manual of your Barska AX11224 Safe in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Barska Safes
More manuals of Safes

Frequently Asked Questions about Barska AX11224 Safe

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.