Home > Household appliances > Cooker Hoods > Award Cooker Hoods > Award EVO1116S-1550 Cooker Hood

Manual Award EVO1116S-1550 Cooker Hood

Need a manual for your Award EVO1116S-1550 Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

• If the hood does not have a power cable with a plug, or other means to disconnect it from the mains with

a separation between the poles, and with means to disconnect completely under category III overvoltage

conditions, it must be fitted with means to disconnect it from the mains in case of category III overvoltage

conditions.

• Disconnection from the mains after installation should be accessible for the user. The power plug must

be easily accessible or if not, there must be a disconnection switch in compliance with electrical

installation regulations.

• Take special care when perforating walls or ceilings and ensure that there are no hidden electrical

cables, pipes, metal beams, etc., as perforating them could cause great damage, short circuits or the

transmission of noise and vibrations.

• IMPORTANT: Before connecting the appliance to the mains, make sure the current is first turned

off (differential or circuit breaker on the general electrical panel of the house).

• WARNING: Always disconnect power to the hood before cleaning or maintenance operations,

either by unplugging it or disconnecting with the circuit breaker on the general electrical panel of

the house. Never use steam or high pressure devices to clean the hood (electrical safety

regulations), see section 8 on cleaning and maintenance

• The minimum distance between the surface of the cooktop and the lower edge of the hood must be 65

cm if the extractor hood is fitted over gas cooker. If the installation instructions of the gas cooker

indicates a greater distance, this must be followed.

• Hood and conduit installation must comply with regulations on ventilation of closed spaces. More

specifically, the exhausted air must not be led through a conduit that is used for exhausting fumes from

other appliances using gas or other fuels (central heating installations, etc.).

NB! When the hood is in operation “in suction” at the same time as a heating system that depends

on ambient air (gas, oil, coal boiler, chimney, etc.), take special care to avoid the hood abosrbing air

needed for combustion, this could cause dangerous accumulations of carbon monoxide in the premises or

home, which could be deadly. If the extractor hood is installed together with a combustion appliance such

as a boiler, chimney or local heating, the manufacturers of these appliances must be contacted to ensure

optimum and risk-free operation.

• Negative pressure in the premises must not exceed 0.04 mbar. This will allow the hood to operate in

optimum conditions. To achieve this, it is necessary to have a permanent entry of fresh air to avoid air

stagnation, it is recommended to have a ventilation grille for this purpose. Doors and windows are not

enough.

• Electrical power supply must be stable and meet the electrical requirements of the appliance (see the

nameplate of the appliance). If the power supply is unstable, with variations in voltage, current, surges

and cuts, electrical storms, etc., the hood could malfunction and even be damaged, in which case repairs

will not be covered by the guarantee. If any of these things happen, disconnect the hood and contact an

electrician or your electrical company to solve the problem.

• Improper and unauthorised handling of the hood, as well as modifying, cutting or perforating the body,

structure, motor or wiring of the hood are expressly forbidden. In case of any of the above, the guarantee

will be automatically void and the manufacturer will not be held liable for any possible harm or damages.

• The hood is an electrical appliance for fume extraction and must not be used as a support for objects or

utensils.

1. SAFETY INSTRUCTIONS

Rating

Let us know what you think about the Award EVO1116S-1550 Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Award EVO1116S-1550 Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Award EVO1116S-1550 Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Award EVO1116S-1550 Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Award. They might be able to provide an original manual. Are you looking for the manual of your Award EVO1116S-1550 Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Award
Model	EVO1116S-1550
Category	Cooker Hoods
File type	PDF
File size	1.27 MB

All manuals for Award Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Award EVO1116S-1550 Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1232) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (660) Read more