Home > Miscellaneous > Hand Dryers > ASI Hand Dryers > ASI 0141 Hand Dryer

Manual ASI 0141 Hand Dryer

Need a manual for your ASI 0141 Hand Dryer? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Hand Dryer

www.americanspecialties.com

Symptom Corrective Action

Diagnostics and Remedies

If the dryer will not run First ensure that the breaker supplying the dryer is operational.

If it is, disconnect the power and remove the dryer cover.

Check for obstructions blocking the rotation of the blower and

clear any found. If it spins freely, check the motor and

thermostat for proper operation out of the unit. Replace any

failed items. Taking suitable precautions to avoid shock hazard,

reconnect the power and check for voltage at the terminal block.

If there is power and the dryer will not run, replace the circuit

board module (CBM) .

If the element gets hot but the fan

motor does not turn

Disconnect the power. Remove the dryer cover and check for

obstructions in the fan housing. Damaged fans must be

replaced. If there are no obstructions, replace the motor.

If the fan motor runs but the element

does not get hot (Dryer blows cold air)

Disconnect the power and remove the dryer cover. Check for

loose or damaged wires. Remove the blower housing.

Check the element for signs of burning or breakage. Damaged

element must be replaced. If the element does not appear

damaged, disconnect it at the CBM and check element wire

continuity (see tech spec). An open circuit indicates damage to

the element wire and to the integral temperature limit control

(TLC). Separate the TLC and test for open circuit. If this is the

case, replace the element and/or the thermostat.

If the unit runs but makes a

buzz noise

Disconnect the power. Remove the dryer cover and check the

fan for obstructions and/or rubbing on the housing as it rotates.

Remove any obstructions and replace fan if the rubbing condition

exists.

06092857

Operating Instructions and Parts Manual

Surface-mounted Automatic hand dryer

If the dryer cycles by itself, or runs

all the time, or shuts off by itself

while in mid-cycle

Ensure that there is no obstruction on or in front of the

infra-red sensor. Clean any dirt off the sensor lens. Check for

voltage spikes on power line. If the problem persists, replace the

circuit board module (CBM).

Rating

Let us know what you think about the ASI 0141 Hand Dryer by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the ASI 0141 Hand Dryer?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the ASI 0141 Hand Dryer. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your ASI 0141 Hand Dryer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact ASI. They might be able to provide an original manual. Are you looking for the manual of your ASI 0141 Hand Dryer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.