Manual Asaklitt CL22140V01 Air Bed

Manual

GREAT BRITAIN • CUSTOMER SERVICE

tel: 020 8247 9300 e-mail: [email protected].uk internet: www.clasohlson.co.uk postal: 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

ENGLISH

Ver. 20170104

Airbed

Art.no 18-3618-1 Model CL22139V01

18-3618-2 CL22140V01

31-3215 CL22139

31-3215-1 CL22140

Please read theentire instruction manual before using theproduct

and then save it for future reference. We reserve theright for any

errors in text or images and any necessary changes made to

technical data. In theevent of technical problems or other queries,

please contact our Customer Services.

Safety

• For indoor use only.

• Do not expose theelectric pump to moisture.

• Inspect themains lead regularly. Do not use theairbed if

thepower lead or plug is damaged.

• Never run thepump for longer than 15 minutes at atime.

Let themotor cool down for 20 minutes before using it again.

Unplug thepump when it is not in use.

• Do not let children use theelectric pump without supervision.

• Do not use hot air to fill theairbed, as theairbed might melt.

• Do not overfill theairbed. Adequate inflation is when thebed is

fully expanded and firm.

• Theairbed is not abuoyancy aid. Do not use it on thewater.

• Theairbed is not alifebuoy or life-saving device.

• Keep theairbed away from fire, otherwise it could melt.

• Theairbed is not atoy. Do not stand or jump on it.

• Always have theflocked surface facing upright.

• Never hold theair inlet/outlet next to your eyes or hair when

thepump is running.

• Theairbed may be used by persons with reduced physical,

sensory or mental capability, lack of experience or knowledge

which could jeopardise their safety, provided they have been

given proper supervision or instruction regarding thesafe use of

theproduct and understand any hazards involved.

• Never let children play with theairbed.

Product description

Airbed with built-in electric pump for speedy inflation and deflation.

Highly comfortable bed with flocked top. Phthalate-free.

Inflating the airbed

1. Open thecable storage compartment to access themains lead.

2. Plug themains lead into awall socket.

Care and maintenance

Note: If theairbed is used permanently with some kind of mattress

topper, it should be aired regularly. Otherwise moisture can develop

between theairbed and themattress topper, which in time can lead

to mould.

• If theairbed is dirty, clean it using adamp cloth. Do not use

strong detergents.

• Make sure that theairbed is dry before folding it up for storage.

• Empty theairbed of all air before storage. Store theairbed in

acool, dry place.

• Keep sharp objects away from theairbed.

Responsible disposal

3. Turn thecontrol knob

to [ INFLATE ].

2. Turn thecontrol knob

to [ DEFLATE ].

4. When theairbed is firm but not

hard, stop thepump by turning

thecontrol knob to [ OFF ].

3. When theairbed has deflated,

stop thepump by turning

thecontrol knob to [ OFF ].

5. Unplug thepump and return thelead to it storage compartment.

Note: Theairbed might lose some of its firmness after it has been

inflated because theair being pumped in becomes warm as it is

pumped. Once theair has cooled down it loses some of its volume.

ThePVC can also stretch alittle as theairbed is inflated, which can

also contribute to theairbed losing some of its firmness awhile

after inflation.

Deflating the airbed

1. Plug themains lead into awall socket.

4. Unplug thepump and return thelead to it storage compartment.

Manual bed inflation

It is possible to inflate theairbed manually if there is no wall

socket available.

1. Remove thecap from theair valve.

2. Connect ahand pump to theair valve. Don’t use acompressor

or other mechanical pump.

3. Inflate thebed manually.

4. When theairbed is fully inflated, disconnect thehand pump and

put thecap back on theair valve.

This symbol indicates that this product should not

be disposed of with general household waste. This

applies throughout theentire EU. In order to prevent

any harm to theenvironment or health hazards

caused by incorrect waste disposal, theproduct must

be handed in for recycling so that thematerial can be

disposed of in aresponsible manner. When recycling

your product, take it to your local collection facility

or contact theplace of purchase. They will ensure

that theproduct is disposed of in anenvironmentally

sound manner.

Specifications

Power supply 220–240V, 50Hz

Power 130 W

Size

18-3618-1 203×157×40cm

18-3618-2 203×97×40cm

31-3215 203×97×40cm

31-3215-1 203×157×40cm

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Asaklitt CL22140V01 Air Bed. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Asaklitt. They might be able to provide an original manual. Are you looking for the manual of your Asaklitt CL22140V01 Air Bed in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Asaklitt Air Beds
More manuals of Air Beds

Frequently Asked Questions about Asaklitt CL22140V01 Air Bed

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.