Manual Anko Wanderer Baby Walker
Need a manual for your Anko Wanderer Baby Walker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
Read these instructions carefully before use and keep for future reference. The child
may be hurt if you do not follow these instructions.
User guide
Toy Tray
Frame
Seat
Upper Tray
Cover
Stopper
Base
Front castors
Rear
Castors
WANDERER WALKER
INSTRUCTION MANUAL
adjust button
adjust
mechanism
adjust button
adjust
mechanism
1
Lift the tray up to the desired
height and make sure the locking
device is engaged.
2
To adjust the height to the upper
position, pull the upper tray to the
height you require.
To adjust the height to the lower
position, turn the adjustment button
90 degrees and press the button
upward to release the lock, then
press the tray to the required
position.
Warning: Please make sure the
baby is not in the walker when
you adjust height and make sure
the adjustment mechanism is
locked before use.
Keycode: 42223245
MADE IN CHINA
©KMART AUSTRALIA LIMITED
ANKO, KIDS&CO. AND BABY SOLUTIONS ARE ALL TRADEMARKS OF KMART AUSTRALIA LIMITED.
THEY ARE USED IN NEW ZEALAND BY KMART NZ HOLDINGS LIMITED TRADING AS KMART IN
NEW ZEALAND.
KMART AUSTRALIA - 690 SPRINGVALE RD, MULGRAVE, VIC 3170 AUSTRALIA.
KMART NEW ZEALAND - REGIONAL OFFICE C/O KMART PAPATOETOE STORE HUNTERS PLAZA,
GREAT SOUTH RD, PAPATOETOE, AUCKLAND, NEW ZEALAND.
CAUTION
Read these instructions carefully before assembly and use and keep for
future reference. The child may be hurt if you do not follow these instructions.
directional
wheel
universal
wheel
Assemble
1
1
3
4
2
2
4
3
5 6
6
4
3
2
1
3
2
1
5
Remove base and frame from
carton and extend tray from base.
The base will be upside down and
wrong way around. Remove base
from the frame by detaching the
frame from the frame runners
positioned in the base in addition
to removing the cable ties.
Place the base of the walker on a
flat surface, with the bottom facing
up. Insert rear and front castors
into corresponding openings by
pressing and snapping into
positions. Note: once fitted, pull
on castors to ensure it is securely
attached.
Turn the base correct way up and
facing correct way. Insert the front
2 arms of the frame into the frame
runners positioned at the front of
the base. Using the folding
adjustor situated under the tray,
turn the lever and let the walker
fold down. Then insert the back
frame arms into the "8" shaped
hole at the back of the base on
either side.
Position the seat on the frame and
attach it by inserting the tabs into
the corresponding holes. Make
sure to insert the tabs on sides
first, and then insert the tabs in
center. Make sure you have
installed the seat correctly.
To unfold the walker, simply pull
the upper tray to the upright
position. To fold, simply turn the
lever under the tray.
Attach toys to the corresponding
holes on the tray and secure with
the screws.
Drawings in the manual are for visual purposes only. Actual product may vary slightly.
The manufacturer reserves the right to change any specification or feature without prior notice.
CARE AND MAINTENANCE:
WARNING:
The walker is not intended for babies that can already walk unassisted.
WARNING:
Do not use the walker if it is damaged or broken.
WARNING:
Do not use until the baby can sit upright by itself.
WARNING:
Clean friction components regularly to maintain stopping performance.
WARNING:
Never leave the child unattended. Always keep child in view while in walker.
WARNING:
Use only on flat surfaces free of objects that could cause the walker to tip over.
WARNING:
To avoid burns, keep the child away from hot liquids, ranges, radiators,
space heaters, fire places etc.
WARNING STAIR HAZARD:
Avoid serious injury or death. Block stairs/steps securely before using walker.
_
- Adult assembly required.
- Read all instructions before assembly and use of the product.
- This baby walking frame is intended to be used by children who can sit unaided, approximately
from 6 months. It is not intended for children weighing more than 12kg and/or more than 78cm
in height.
- Take care when unpacking and during assembly.
- Dispose of all packaging materials carefully after assembly.
- Regularly check that all fittings remain tight. Tighten if required.
- Inspect the product before assembly and periodically during use. Never use this product if
there is any loose or missing fasteners, joints or broken parts.
- Any additional or replacement parts should only be obtained from the manufacturer or distributer.
- Never substitute parts.
- All assembly fittings are to be properly tightened. Inspect regularly and re-tighten as necessary.
- To clean the seat pad, removable and non-removable fabric covers may be hand washed or spot cleaned.
Use mild soap or upholstery shampoo. Wash separately. Do not bleach. Dry in shade thoroughly before re-use
and avoid direct heat and sunlight. Do not iron. Do not dry clean.
- To clean the walker, wipe with a damp cloth and dry immediately with a soft clean cloth. Do not
use abrasive pads, bleach or strong household cleaners. Damage may result.
Loading…
Rating
Let us know what you think about the Anko Wanderer Baby Walker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your Anko Wanderer Baby Walker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Anko. They might be able to provide an original manual. Are you looking for the manual of your Anko Wanderer Baby Walker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | Anko |
| Model | Wanderer |
| Category | Baby Walkers |
| File type | |
| File size | 3.6 MB |
All manuals for Anko Baby Walkers
More manuals of Baby Walkers
Join the conversation about this product
Here you can share what you think about the Anko Wanderer Baby Walker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.