Home > Computers & Software > Wireless Chargers > Anker Wireless Chargers > Anker B2515 PowerWave Evo Wireless Charger

Manual Anker B2515 PowerWave Evo Wireless Charger

Need a manual for your Anker B2515 PowerWave Evo Wireless Charger? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

LED Indicator Status

Solid blue for 3 seconds,

then off

Connected to power

Solid blue Charging mobile device

Flashing blue

- Metal or abnormal temperature detected

Using a non-Quick Charge™ 3.0 wall charger

 For the fastest and safest charge, use the supplied Anker® charger

or a charger compliant with the Quick Charge™ 3.0 Standard

(supporting 12V). Other chargers may not work well with this device.

 Using an ultra-thick protective phone case or a case with a

magnetic/iron plate is not recommended as it may affect the

wireless charging function.

Important Safety Instructions

 Avoid dropping.

 Do not disassemble.

 Do not expose to liquids.

 For the safest and fastest charge, use original or certified cables.

 This product is suitable for moderate climates only.

 The maximum ambient temperature during use of this product must not

exceed 40°C.

 Open flame sources, such as candles, must not be placed on this product.

 Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

Note: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation.

This equipment generates,

uses,

and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

(1) Reorient or relocate the receiving antenna. (2) Increase the separation

between the equipment and receiver. (3) Connect the equipment into an outlet

on a circuit different from that to which the receiver is connected. (4) Consult

the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated

with minimum distance of 10 cm between the radiator & your body.

IC Statement

This device complies with RSS-216 of Industry Canada. Operation is subject to

the condition that this device does not cause harmful interference.

Specifications

Input 12 V 1.5 A

Output 5 W / 7.5 W / 10 W

Size 110 x 110 x 18 mm / 4.3 x 4.3 x 0.7 in

Weight 99g /3.5 oz

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2515 is in

compliance with Directive 2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

https://www.anker.com/products

Anker Innovations Limited

Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,

Hong Kong

LED-Anzeige Status

Leuchtet 3 Sekunden lang

blau, dann aus

An Stromversorgung angeschlossen

Leuchtet blau Mobilgerät lädt

Blinkt blau

- Metall oder ungewöhnliche Temperatur erkannt

- Verwendung eines anderen Ladegeräts als

Quick Charge™ 3.0

 Am schnellsten und sichersten erfolgt der Ladevorgang mit dem

Anker® Ladegerät aus dem Lieferumfang oder mit einem Quick

Charge™ 3.0-kompatiblen Ladegerät (mit 12-V-Unterstützung).

Andere Ladegeräte funktionieren bei diesem Gerät u.U. nicht.

 Von der Verwendung extrastarker Smartphone-Schutzhüllen oder

Schutzhüllen mit Magnet- bzw. Metalleinsätzen wird abgeraten, da

diese die kabellose Ladefunktion beeinträchtigen können.

Wichtige Sicherheitsinformationen

 Nicht fallenlassen.

 Nicht zerlegen.

 Keinen Flüssigkeiten aussetzen.

 Zum sichersten und schnellsten Laden nur Original- oder zertifizierte Kabel

verwenden.

 Das Produkt ist nur zur Verwendung in gemäßigten Klimazonen konzipiert.

 Die maximale Umgebungstemperatur während der Verwendung des

Produkts darf 40 °C nicht übersteigen.

 Offene Flammen wie z.B. Kerzen dürfen nicht auf das Produkt gestellt werden.

 Reinigen Sie das Produkt nur mit einem trockenen Tuch oder einem Pinsel.

Technische Daten

Eingang 12 V 1.5 A

Ausgang 5 W / 7.5 W / 10 W

Abmessungen 110 x 110 x 18 mm

Gewicht 99g

LED

インジケーター意味

青色に 3 秒間点灯後に消灯電源に接続

青色の点灯モバイル機器の充電中

青色の点滅

-金属または異常な温度が検出されました



Quick Charge™ 3.0



非対応の充電器が使用されています

• すばやく安全に充電するため、付属のAnker®充電器またはQuick

Charge™3.0 規格（12V対応）に準拠している充電器をご使用くだ

さい。その他の充電器では正常に充電できない場合があります。

• ワイヤレス充電がうまく実行されない可能性があるため、スマート

フォンに極端に分厚いケースやマグネット式もしくは鉄製のケース

をつけたままのご使用はお控えください

。

安全上のご注意

• 過度な衝撃を与えないでください。

• 危険ですので分解しないでください。

01 02

• 水分に触れないようにしてください。

• すばやく安全に充電するため、純正または認証されたケーブルをご使用く

ださい。

• 本製品は極端に暑いもしくは寒い気候での利用には適しておりません。

• 本製品の周囲の気温が40℃を超える場合、使用しないでください。

• ろうそくのような火がついた物体を本製品の上に置かないでください。

• 本製品のお手入れをする際は、乾いた布もしくはブラシのみを使用してく

ださい。

仕様

入力

12 V 1.5 A

出力

5 W / 7.5 W / 10 W

サイズ

110 x 110 x 18 mm / 4.3 x 4.3 x 0.7 in

重量

99g /3.5 oz

Indicateur LED État

Bleu fixe pendant 3secondes,

puis s'éteint

En tension

Bleu fixe Appareil mobile en charge

Bleu clignotant

- Présence de métal ou température anormale détectée

- Utilisation d'un chargeur mural autre que Quick

Charge™ 3.0

 Pour le processus de charge le plus rapide et le plus sûr, utilisez le

chargeur Anker® fourni ou un chargeur compatible avec la norme

Quick Charge™ 3.0 (prenant en charge 12V). Les autres chargeurs

peuvent ne pas bien fonctionner avec cet appareil.

 L'utilisation d'un étui de protection ultra-épais ou avec une plaque

magnétique/en fer n'est pas recommandée: cela risquerait d'affecter

la fonction de charge sans fil.

Instructions importantes de sécurité

 Ne pas faire tomber.

 Ne pas démonter.

 Ne pas exposer à des liquides.

 Pour obtenir la charge la plus sûre et la plus rapide, utiliser des câbles d'origine

ou certifiés.

 Ce produit est adapté uniquement aux climats modérés.

 La température ambiante maximale pendant l'utilisation de ce produit ne doit

pas dépasser 40°C.

 Ce produit ne doit pas être exposé à des sources de flamme nue, notamment

des bougies.

 Nettoyez ce produit uniquement avec un chiffon sec ou une brosse.

Spécifications techniques

Entrée 12 V 1.5 A

Sortie

5 W / 7.5 W / 10 W

Taille 110 x 110 x 18 mm / 4.3 x 4.3 x 0.7 in

Poids 99g /3.5 oz

Indicatore LED Stato

Blu fisso per 3 secondi, poi

si spegne

Collegato a una fonte di alimentazione

Blu fisso Ricarica del dispositivo mobile

Blu lampeggiante

- Presenza di metallo o temperatura anomala rilevata

- Utilizzo di un caricabatterie da parete non Quick Charge™ 3.0

For FAQs and more information, please visit:

https://www.anker.com/support

51005000844 V01

A2515

Rating

Let us know what you think about the Anker B2515 PowerWave Evo Wireless Charger by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Anker B2515 PowerWave Evo Wireless Charger?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Anker B2515 PowerWave Evo Wireless Charger. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Anker B2515 PowerWave Evo Wireless Charger. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Anker. They might be able to provide an original manual. Are you looking for the manual of your Anker B2515 PowerWave Evo Wireless Charger in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.