Home > Garden & Terrace > Wood Splitters > AL-KO Wood Splitters > AL-KO KHS 5200 Wood Splitter

Manual AL-KO KHS 5200 Wood Splitter

Name: AL-KO KHS 5200 Wood Splitter
Brand: AL-KO
SKU: KHS 5200
Rating: 87 (69 reviews)

Need a manual for your AL-KO KHS 5200 Wood Splitter? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 43 comments and has 69 votes with an average product rating of 87/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

HOLZSPALTER

KHS 3700 / 5200

Betriebsanleitung

INFORMATION I MANUALS I SERVICE

QUALITY FOR LIFE

Garden + Hobby

462706_f I 02/2010

FIN

SLO

RUS

Rating

Let us know what you think about the AL-KO KHS 5200 Wood Splitter by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the AL-KO KHS 5200 Wood Splitter?
Yes No

87%

13%

69 votes

Join the conversation about this product

Here you can share what you think about the AL-KO KHS 5200 Wood Splitter. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

Bruno Achard 18-07-2019
Could you tell me that it is the screw that must be removed to check the hydraulic oil level because drawing no 8 in the instruction booklet does not correspond to the AL-KO KHS 52000 splitter. Thank you.

reply | This was helpful (97) Read more (Translated by Google)

Bernard AYORA 03-04-2020
1 °) I have not found how to fill the hydraulic oil tank, 2 °) which button should you press to trigger the splitter? Simultaneously with the lever?

This was helpful (119) (Translated by Google)

Mogens Lyhne 27-07-2022
Can't find the oil dipstick on my ALKO 5200 either. Drawing fig. 8 in the instructions is not found on my clover.

This was helpful (50) (Translated by Google)

JUTEAU MICHEL 30-08-2022
THE K-O 5200 LOG SPLITTER LOSE OIL I don't have the manual for this item how to get it for free

This was helpful (20) (Translated by Google)

Massimiliano. Cordovana 07-10-2020
I would like to know the total amount of oil needed for this wood splitter. Thanks

reply | This was helpful (78) (Translated by Google)

Jerome DRUGUET 02-02-2020
Hello. Can you tell me what is the wing screw on the end of the splitter on the splitter side for? If I open it, air escapes.

reply | This was helpful (44) Read more (Translated by Google)

Jerome DRUGUET 05-03-2020
The wing screw must be loosened during the work to release the air. Be careful, it tends to loosen completely during use. Regards

This was helpful (20) (Translated by Google)

John Hawson 22-03-2020
I have used my Al-Ko khs 5200 splitter for ten years. Brilliant. But today I was splitting some big logs of hard ash and I noticed something happening which has never happened before: the lever (which you have to pull whilst pushing the button) forcefully pushed back against my hand as the log was pushed hard and did not split. I tried again, same thing happened. Eventually split occurred when I rotated log so cut was more peripheral. Why did lever push back?

reply | This was helpful (34) Read more

Gordon 04-12-2020
Hi, Did you ever resolve your issue,as I have the same problem?

This was helpful (14)

Hans Vesti 16-03-2020
Hi tree clover where to add oil. ???

reply | This was helpful (32) (Translated by Google)

Jørn Lunde 20-10-2021
My splitter does not "start" - only a hum in the engine, then the fuse blows out, but no movement or anything. At first I thought it was too little hydraulic oil, but have checked and refilled. Any advice on what this might be?

reply | This was helpful (26) Read more (Translated by Google)

Steinar Knudsen 23-01-2022
Hi, the same thing happens with mine, could it be the capacitor?

This was helpful (19) (Translated by Google)

Gius9 17-01-2022
Surely the capacitor needs to be replaced

This was helpful (7) (Translated by Google)

Robert Harler 20-05-2021
Which oil should be added? Hydraulic oil?

reply | This was helpful (24) (Translated by Google)

caput sylvain 07-10-2020
Hello the cylinder comes out but does not force on the wood no leakage ext. cordially

reply | This was helpful (21) Read more (Translated by Google)

Roger BARTHE 01-12-2020
same problem, no effective thrust and the pusher does not return automatically when it reaches the end of its travel towards the splitting wedge, the thrust control lever must be actuated to return the pusher otherwise it remains in the end-of-travel position, which is abnormal. At the moment I don't have a solution to this problem, even after adding oil. Sorry, but I am interested in a possible solution, best regards.

This was helpful (45) (Translated by Google)

guido speziali 05-09-2020
I can't figure out where the oil nut is

reply | This was helpful (20) (Translated by Google)

Inga Andersson 26-04-2022
Where do I add hydraulic oil? It does not work right now!

reply | This was helpful (19) (Translated by Google)

cudey jean claude 12-01-2021
Problem already raised, the log pusher does not return. The oil level seems correct, between mini and maximum, but checked push button forward ... Thank you for your help.

reply | This was helpful (16) Read more (Translated by Google)

Chassery cyril 02-12-2021
Hello did you find the solution to your problem because I too have the same problem. Sincerely Mr Chassery. / [email protected]

This was helpful (10) (Translated by Google)

luc richard 24-02-2023
my pusher remains stuck at the end of the stroke but does not return what is the problem and how to solve it

This was helpful (0) (Translated by Google)

elmo walkes 18-01-2021
I have a leak at the switch button end just above the motor of my AL-KO log splitter. I have removed the three retaining bolts and black rubber seal is damaged. Would someone please tell if this item can be purchased separately? I look forward to a speedy reply. Thanks in advance.

reply | This was helpful (16) Read more

elmo walkes 20-01-2021
To my question above the answer is yes. T There are two O rings that sit between the two castings. One that holds the Motor and one that holds the pusher.

This was helpful (0)

Robert Harler 20-05-2021
Which oil should be used? Hydraulic oil?

reply | This was helpful (16) (Translated by Google)

Christer Asp 06-09-2021
I can only start my splitter if I put to the fan. Otherwise the engine just hums. Just as if it goes hard in the beginning ..

reply | This was helpful (14) Read more (Translated by Google)

Yves Bottazzi 26-09-2022
the engine and the hydraulic system work but the pusher does not have the strength to split the logs

This was helpful (21) (Translated by Google)

Tom Parker 03-06-2021
Looking for replacement electric motor for alko khs 5200 wood splitter can anyone recommend suppliers anc ontact details please

reply | This was helpful (12)

Mats Näslund 02-08-2022
Bought cleaver yesterday Is it hydraulic oil in new split

reply | This was helpful (9) (Translated by Google)

mogens sigersdal 02-01-2023
where do you fill up the hydraulic oil?

reply | This was helpful (7) (Translated by Google)

R G. 19-03-2021
Same problem as caput sylvain Roger BARTHE cudey jean claude .... which nobody answered ... Everything works but no power on the pusher. It looks like a joint problem, but I attack the dismantling of the whole machine without any pleasure .... !!!

reply | This was helpful (5) (Translated by Google)

John Harris 26-03-2021
When the ram returns, should the electric motor rotate?

reply | This was helpful (5)

Jean Pierre PORTIER 23-07-2022
Good evening After 10 years of good operation of my KHS 5200 splitter, a fault for which I have no solution: the pusher does not return to its starting position. Is the repair possible….in Nantes? PS: correct oil level and satisfactory thrust, it is only the return that dares to be a problem. Thanks for any response Email: [email protected]

reply | This was helpful (5) Read more (Translated by Google)

JC Cudey 24-07-2022
Same problem a few years ago. The convenience store wanted to scrap it for me…. Since it works tb. If I remember correctly, near or under the control lever there is a screw. You have to unblock it, air will come out... tighten it. Check that the small pusher controlled by the handle is in the extended position. Not being at home, I cannot specify the position of this screw, do not hesitate to unlock each of them in this sector Cordially

This was helpful (2) (Translated by Google)

luc richard 24-02-2023
my pusher remains blocked at the end of the race but does not come back, what is the problem, if someone has the solution to solve it, I put my email address if someone could answer me. mail:[email protected]

This was helpful (1) (Translated by Google)

Kjell 07-03-2023
Hello The motor on my AL-KO 5200 does not work. Where can I buy a new engine?

reply | This was helpful (5) (Translated by Google)

Elisabeth Börjesson 02-01-2022
Where can I find a new wheel for my splitter?

reply | This was helpful (3) (Translated by Google)

Gunnar Fredriksson 04-02-2023
I look in vain for the level marking on the dipstick. I also wonder if oil is not included in the delivery as the dipstick is completely dry all the way down. Email: [email protected]

reply | This was helpful (3) (Translated by Google)

Frans De pauw 09-09-2022
please have a Dutch manual

reply | This was helpful (2) (Translated by Google)

carlo 27-02-2023
I have had the 5200 log splitter for about 10 years. I am satisfied with its operation, recently there was an oil leak from the hydraulic pump, I can't find the right o-rings to replace them, could you tell me where I can find them.

reply | This was helpful (2) (Translated by Google)

Connyliljestrand 22-08-2020
Worked well but now the fan wheel has cracked in half without injury

reply | This was helpful (1) Read more (Translated by Google)

Connyliljestrand 22-08-2020
Difficult to get a new fan wheel

This was helpful (9) (Translated by Google)

pascal 17-11-2023
Hello, I am going to replace the HLP46 oil in my KHS 5200 wood splitter. Questions: 1) How to proceed? 2) How much oil should I add?

reply | This was helpful (0) (Translated by Google)

Antonio ballabio 17-01-2024
Good morning, I would like to replace the hydraulic oil of my wood splitter (hlp 46 oil) but I don't know whether to use a mineral or synteric oil

reply | This was helpful (0) (Translated by Google)

More about this manual

We understand that it’s nice to have a paper manual for your AL-KO KHS 5200 Wood Splitter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact AL-KO. They might be able to provide an original manual. Are you looking for the manual of your AL-KO KHS 5200 Wood Splitter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	AL-KO
Model	KHS 5200
Category	Wood Splitters
File type	PDF
File size	4.2 MB

All manuals for AL-KO Wood Splitters
More manuals of Wood Splitters

Frequently Asked Questions about AL-KO KHS 5200 Wood Splitter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How many tons of force does my wood splitter need? Verified

For light personal use making your own firewood 22 or 27 tons of force are sufficient. With heavy personal use it is advisable to use 25 tons. For industrial use 40 tons and up is recommended.

This was helpful (113) Read more