Home > Household appliances > Heaters > Aktobis Heaters > Aktobis WDH-BGP10S Heater

Manual Aktobis WDH-BGP10S Heater

Need a manual for your Aktobis WDH-BGP10S Heater? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

Email: Info@Aktobis.de

Important safety instructions:

- The heater is not suitable for use outdoors or in other wet or damp environments !

- Please note that the heater can become very hot during operation, so keep a sufficient distance from flammable or easily

combustible objects at all times !

- Do not place the heater directly next to a power socket !

- Do not use a timer or automatic on/off switch in conjunction with this heater !

- Never use the heater on moving surfaces, objects or vehicles ! There is a risk that the heater may tip over.

- It is recommended to use a separate power source (socket) only for the supply of the heater. (Please do not use multiple

sockets to operate the heater).

Furthermore, please ensure that the power cable is always laid with sufficient distance to the heat source.

- Supervise the heater when children are near the appliance !

- Watch out for electricity, never walk into or insert objects into the appliance !

- Do not place any objects on the heater !

- Do not block the supply and/or exhaust air of the unit and please ensure sufficient space/clearance around the unit !

- Ensure that there is sufficient air supply to the unit, otherwise it can lead to a reduction in performance and, in the worst

case, to overheating and/or fire !

- Only qualified personnel or electricians are allowed to open the unit !

- Make sure that no moisture gets into or onto the unit !

- Only use the recommended voltage for operating the unit !

- Make sure that the power cable is unfolded (untied) before connecting it to the socket !

- Make sure that the plug is cleanly and properly connected to the socket before using the appliance !

- Never reach near the plug or socket with wet hands !

- Do not repair defective or damaged cables on the unit yourself, you could get a severe electric shock !

- Make sure that highly flammable substances (e.g. gases/oils etc.) are never in the vicinity of the unit !

- If the connecting cable of this appliance is damaged, it must be replaced by the manufacturer or its after-sales service or a

similarly qualified person in order to avoid hazards.

- This appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and/or knowledge, unless they have been given supervision or instruction concerning use

of the appliance by a person responsible for their safety.

- If you are not going to use the unit for a long time, switch it off and disconnect the mains plug !

Please switch off the unit immediately and disconnect it from the power supply if anything seems to be wrong! In this case,

please contact a specialist and do not try to repair the unit yourself!

Examples: Fan does not run during operation or fuse has blown.

Mounting the carrying handle

To reduce the volume, the carrying handle is dismantled on a new unit.

The following accessories are included for the transport handle assembly:

1. 1 x Carrying handle

2. 2 x Connecting screw

3. 2 x Spring washer

4. 2 x Washer

Take the carrying handle and fit it over the upper screw holes on your fan heater. Now put the spring washer over each

connecting screw. Then put the washer over the connecting screw. Now insert the screw from above through the carrying

handle into the connecting holes provided. Now tighten both connecting screws properly. Done!

Download manual in English (PDF, 0.49 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Aktobis WDH-BGP10S Heater by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Aktobis WDH-BGP10S Heater?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Aktobis WDH-BGP10S Heater. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Aktobis WDH-BGP10S Heater. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Aktobis. They might be able to provide an original manual. Are you looking for the manual of your Aktobis WDH-BGP10S Heater in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Aktobis
Model	WDH-BGP10S
Category	Heaters
File type	PDF
File size	0.49 MB

All manuals for Aktobis Heaters
More manuals of Heaters

Frequently Asked Questions about Aktobis WDH-BGP10S Heater

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How does dust affect the efficiency of a heater? Verified

Dust can accumulate on the heating elements and in the air filters of a heater, reducing its efficiency. This can cause the heater to work harder to produce the same amount of heat, leading to increased energy consumption and higher utility bills. To maintain the efficiency of your heater, make sure to clean it regularly and replace the air filter as needed.

This was helpful (206) Read more

How do I determine the size of heater I need for a room? Verified

The size of the heater you need for a room depends on the size of the room and the insulation of the space. A general rule of thumb is to use 60 watts per square meter of space. For example, if a room is 14 square meter, a 840-watt heater would be appropriate.

This was helpful (171) Read more