Home > Do-It-Yourself > Diamond Drills > AEG Diamond Drills > AEG DB2E 1500 Diamond Drill

Manual AEG DB2E 1500 Diamond Drill

Need a manual for your AEG DB2E 1500 Diamond Drill? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ENGLISH

DB2E 1500, DSB2E 1500

You have high standards and expect to purchase quality goods – quality offered by

AEG.

We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an Electric Power Tool from AEG was the right choice!

DB2E 1500 DSB2E 1500

Connecting voltage 220–240 V 220–240 V 110 V. . . . . . . . . . . . . . . . . . .

50 Hz 50 Hz 50 Hz

Nominal power 1500 W 1500 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

No-load speed

1st gear 0–1100 min

-1

0–1100 min

-1

0–1100 min

-1

. . . . . . . . . . . . . . . . . . . . .

2nd gear 0–3000 min

-1

0–3000 min

-1

0–3000 min

-1

. . . . . . . . . . . . . . . . . . . . .

Speed under load max.

1st gear 725 min

-1

725 min

-1

650 min

-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2nd gear 2000 min

-1

2000 min

-1

1900 min

-1

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Percussion rate – 48000 min

-1

48000 min

-1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Drilling capacity in

1st gear 80–162 mm 80–162 mm 80–152 mm. . . . . . . . . . . . . . . . . . . . . . .

2nd gear 32–90 mm 32–90 mm 32–90 mm. . . . . . . . . . . . . . . . . . . . . . . . . .

Drill opening range ––mm 3–16 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Drive shank M18 M18 M18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Chuck neck diameter 57 mm 57 mm 57 mm. . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 3,3 kg 3,3 kg 3,3 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

J Please pay attention to the safety instructions in the attached leaflet!

J Dust that arises when working on material containing asbestos or stonework

containing crystalline silicic acid is harmful to the health. Please follow accident

prevention regulations.

J Always wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

J Do not pierce the motor housing as this could damage the double insulation (use

adhesives).

J Always disconnect the plug from the socket before carrying out any work on the

machine.

Only plug-in when machine is switched off.

J Keep mains lead clear from working range of the machine. Always lead the cable

away behind you.

J Always use the auxiliary handle.

J When drilling in walls ceiling, or floor, take care to avoid electric cables and gas or

waterpipes.

Typically the A-weighted noise levels of the tool are:

Sound pressure level = 102 dB (A). Sound power level = 115 dB (A).

Wear ear protectors! Measured values determined according to EN 50 144.

DB2E 1500: Typically the hand-arm vibration is below 2.5 m/s

DSB2E 1500: Typically the weighted acceleration is 12 m/s

Measured values determined according to EN 50 144.

Both the electronic drill DB2E 1500 as well as the electronic percussion drill DSB2E

1500 are specially designed for drilling with diamond dry core cutters.

Do not use this product in another way as stated for normal use.

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Use

Mains

connection

Rating

Let us know what you think about the AEG DB2E 1500 Diamond Drill by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the AEG DB2E 1500 Diamond Drill?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the AEG DB2E 1500 Diamond Drill. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your AEG DB2E 1500 Diamond Drill. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact AEG. They might be able to provide an original manual. Are you looking for the manual of your AEG DB2E 1500 Diamond Drill in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	AEG
Model	DB2E 1500
Category	Diamond Drills
File type	PDF
File size	1.27 MB

All manuals for AEG Diamond Drills
More manuals of Diamond Drills

Frequently Asked Questions about AEG DB2E 1500 Diamond Drill

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (4) Read more