Home > Household appliances > Kettles > Adler Kettles > Adler AD 1340 Kettle

Manual Adler AD 1340 Kettle

Need a manual for your Adler AD 1340 Kettle? Below you can view and download the PDF manual for free in English. This product currently has 5 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

9. Keep warm function button / indicator

BEFORE FIRST USE

26. Do not use aggressive detergents to wash the kettle housing - they can damage the

kettle or remove the markings.

27. The device is not designed to work with external schedulers or separate remote

control system.

28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.

25. Descale your kettle regularly. Using kettle with heating element covered by scale may

cause damage.

29. Children aged 3 to 8 years old can enable and disable the device only when it is in its

normal position of use, they are supervised or instructed on the safe use and understand

the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean

or maintain.

DESCRIPTION OF THE DEVICE. ELECTRIC KETTLE AD1340

1. Lid 2. LCD display 3. Housing

4. Handle 5. Base 6. Mesh filter

24. Never use kettle without filter or with open cover (automatic shutdown will not work).

7. Power button ON/OFF 8. Temperature control buttons (+ / -)

BASIC OPERATION:

SINGLE WATER BOILING UP TO 100 ℃

Fill the kettle three times with water to the maximum level, boil and pour it. To remove any factory odor.

2. Place the base (5) on a stable, flat and heat-resistant surface.

4. Insert the power plug into the 220-240V ~ 50 / 60Hz power socket. Place the kettle on the base (5), you hear the "di" sound.

6. After the water boils, the kettle will automatically turn off, you will hear the "di-di" sound.

7. To turn off the kettle before the water finish boiling, lift it off the base (5) or press the power button (7)

8. You can start the kettle again after approximately 2 minutes from the last use.

9. When the device is not in use, the display (2) turn off lighting after 5 minutes.

ADVANCED OPERATION:

3. Remember to close the kettle with the lid (1) after filling, otherwise the kettle will not switch off automatically when the water boils.

1. Fill the kettle with water so that the water level is between the maximum and minimum levels on the water level indicator.

5. Press the power button (7), the display (2) will blink twice, indicating 100 ℃, then the heater will start heating the water, and the LCD

display (2) will show the current water temperature. The water temperature will rise until it boils, i.e. up to 100°C.

lid. Do not open the lid during boiling in kettle or immediately after boiling, because steam

coming out of lid can cause burns.

21. Move the kettle only by holding it by handle..

22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.

23. Never switch on kettle without water.

Put the kettle on the base (5), wait until you hear the “di" sound. Press the temperature control buttons (8), the display (2) will show the

temperature you choose 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃) after that press the power button(7) to confirm the

temperature, the LCD display blinks three times remembering the setting of the selected temperature level. Then the display will show

the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the selected temperature level of 40

℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), , you will hear the "di-di" sound.

PROTECTION DEVICES

CLEANING AND MAINTENANCE

Put the kettle on the base (5), wait until you hear the "di" sound. Press the keep warm function button (9) until the icon (KW) light on

the display (2). Press the temperature control buttons (8) until the display (2) will show the temperature you choose 40 ℃ (or 50 ℃ /

60 ℃ / 70 ℃ / 80 ℃ / 90 ℃) and blink three times remembering the setting of the selected temperature level, then press the power

button (7). The display will show the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the

selected temperature level of 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), you will hear a single "di" sound. Within 2 hours, the

kettle will heat the water cyclically, constantly displaying the selected temperature level to maintain. When the water temperature drops

by 5 ℃ in relation to the selected temperature level of 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), the device will turn on

automatically and heat it.

Note: Only during this procedure, the keep warm function will be active. After removing the kettle from the base, the keep warm

function settings will be reset.

The device is equipped with an automatic fuse against overheating, the fuse will trip when the kettle was used with insufficient water.

Always make sure that the volume of water in the appliance is above the minimum level. If the fuse turns on, turn off the kettle by

pressing the power button (7), then remove the plug from the power socket and allow the kettle to cool for 5-10 minutes. Then fill the

kettle with water and turn on the device that will operate normally.

SINGLE WATER BOILING TO THE SELECTED TEMPERATURE 40 ℃ OR 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃

KEEP WARM FUNCTION AT THE SELECTED TEMPERATURE 40 ℃ OR 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃ /

Rating

Let us know what you think about the Adler AD 1340 Kettle by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Adler AD 1340 Kettle?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Adler AD 1340 Kettle. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Adler AD 1340 Kettle. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Adler. They might be able to provide an original manual. Are you looking for the manual of your Adler AD 1340 Kettle in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Adler
Model	AD 1340
Category	Kettles
File type	PDF
File size	3.28 MB

All manuals for Adler Kettles
More manuals of Kettles

Frequently Asked Questions about Adler AD 1340 Kettle

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the sieve for in my kettle? Verified

This is to catch any loose limescale that might have accumulated over time.

This was helpful (417) Read more

The kettle does not finish and keeps on boiling, what should I do? Verified

In many cases the lid of the kettle was not closed properly. If heat is allowed to escape, the kettle will keep on boiling. If this does not solve the problem you should contact the manufacturer or a mechanic.

This was helpful (279) Read more

Can I boil less than the minimim amount of water? Verified

No. When boiling less than the minimum amount of water, the temperature sensor might malfunction. This might prevent the kettle from switching off at boiling point, resulting in possibly dangerous situations.

This was helpful (122) Read more

Can I boil more than the maximum amount of water? Verified

No. When boiling more than the maximum amount of water, the kettle might overflow. This might result in possibly dangerous situations.

This was helpful (79) Read more

Is it efficient to fill a kettle with hot water from the faucet? Verified

No. To get warm water to the faucet it is often needed to let cold water out first, which will be wasted. Also, the pipes will fill the same amount of hot water which will not be used and will cool, which leads to energy loss. Therefor it is better to fill a kettle with cold water.

This was helpful (79) Read more